Replacement Deadbolt and Door Latch Plus 722 RV Key

Question

Question:

I AM LOOKING FOR A 722 KEY DEAD BOLT LATCH AND PASSAGE DOOR LATCH FOR AN RV. THANKS

asked by: Misty J

0

Expert Reply:

We have the Replacement Bauer 722 Key # BA87RR but if you're needing a dead bolt and door latch for an RV it will be a toss up what part numbers you get as we aren't able to choose specific locks for those kits.

For a latch and deadbolt system you'll need the Bauer Products Motorhome Door Lock # BA64FR.

expert reply by: Jon G

0

Answer 1

I have linked the instructions for the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 that fit your 2013 Toyota Tundra below. Be sure to get a set of HappiJac Original Turnbuckles #LC182898 as they are stainless steel and will last through the…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 4

Hey Chris congrats on the new truck! I did some research and the HappiJac Camper Tie-Downs item #LC236326-205221 is exactly what you need for your 2026 Ram 2500. I'm working on getting our website updated as we speak. This kit includes both front…

view full answer...

Answer 5

We do carry the Replacement Key 724 #BA59RR for your Bauer lock.

view full answer...

Answer 6

Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately. Replacement Trailer Hub Bearing…

view full answer...

Answer 7

We may have a grease seal that will work in your application however, my research had conflicting measurements for the Hadco 3122 that you referenced. I contacted my technical contact at Redline to verify that the Redline Grease Seal #1105-100-031…

view full answer...

Answer 8

First, it does sound like, based on the measurement and information you have provided, that race #L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing #L68149 which has an inner diameter of 1.378 inches…

view full answer...

Answer 9

The measurements for the Lippert 1716 5th Wheel Pin Box - 15,500lbs #LC1324791 are as follows: 3A: 20-3/8" 3B: 29-1/8"

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

I looked up your old DF-IS001 light switch and found it is a simple 12v DC light switch such as the Mini-12v Switch #37213645 you were looking at. As long as the switch you choose is rated for 12v DC power and is the same dimensions it will work just…

view full answer...

Replacement Deadbolt and Door Latch Plus 722 RV Key

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching