Is the Fusion LED Combination Tail Light Bar Sold Individually?

Question

Question:

Hello- Item # STL264RB Is this a pair, or just 1? Thank you.

asked by: Jeff

0

Expert Reply:

The Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide item # STL264RB are sold individually. It measures 20-1/2" long x 1" tall x 3/4" deep.

expert reply by: Jerred H

0

Answer 1

It does sound like a 4-Way flat was added to your 2003 Toyota Tacoma. But that is a good thing because it will be needed to install the 7-Way. To add the 7-Way (if using an in-cab brake controller) you will need installation kit #ETBC7. This provides…

view full answer...

Answer 2

The color temperature of the Optronics LED RV Exterior Scene Light #UCL41CB is a pure white with no warmth to it. It's not so cold that it's blue though. I attached a couple vids to this page that show how it looks installed for you to check…

view full answer...

Answer 3

Hey Todd, welcome back! The Replacement Shank item #325-GH-506 is going to work great with your setup. It's not going to need a stabilizer. The shank has a 2,000 lbs tongue weight capacity so it'll definitely be strong enough for the weight…

view full answer...

Answer 4

Hi Andy; the Brophy Ball Mount for 2-1/2" Hitch #BZ20 is only available with the 2" drop. A 2" ball #A-90 will work with this ball mount but that doesn't help if you need the additional drop. We have the B&W Heavy-Duty Ball…

view full answer...

Answer 5

Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…

view full answer...

Answer 6

Hey Rick, thanks for reaching out. I see you already got your order placed but I wanted to make sure your question was answered. Yes, you can cut the 4-way plug off the #BLU92HR and wire it to a 6-pin or 7-pin plug. People actually do this all the…

view full answer...

Answer 7

Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?

view full answer...

Answer 8

Hey, Lance. The direction the springs are in doesn't matter. They can be to the front or to the rear of the axle and will perform the same either way. What kind of trailer are you working on?

view full answer...

Answer 9

Hello Mike, thanks for reaching out. Is the rear of your van sagging at all? The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA43 is more for reducing sagging which will in turn help with stability, handling and sway reduction.…

view full answer...

Answer 10

Both the turn signal and brake light wire on your RV can be spliced directly to the stop/turn signal light wire on the Fusion LED Combination Tail Light Bar #STL264RB but the bar isn't going to function perfectly. This is because when braking and…

view full answer...

Answer 11

Hi Jose, If you're saying you want to switch both tail lights to LED light strip-style tail lights then I have a few recommendations depending on the length you'd like: 12-5/8" long x 1" wide x 1/2" tall: Thinline LED Trailer…

view full answer...

Answer 12

We have some light bars that will work with a platform style bike rack like your Hollywood Racks Sport Rider #HLY84FR, but there is no light bar made for your bike rack specifically. Can it be done? Yes, but you will need to find a safe way of…

view full answer...

Is the Fusion LED Combination Tail Light Bar Sold Individually?

Product Page this Question was Asked From

Continue Researching