Best 2 Inch Trailer Hitch for a 2019 Prius Prime Advanced

Question

Question:

I’m planning on using this hitch for my e-bikes bought carrier from etrailer last year and also for pulling my 2006 SportsRig Micro trailer which I pulled with my 2006 and 2012 Prius. The weight of the trailer when loaded will be approximately 400 pounds. Which hitch would you recommend for this type of usage?

asked by: Thomas A

0

Expert Reply:

The best hitch for your 2019 Toyota Prius Prime is going to be the EcoHitch Stealth Trailer Hitch Receiver item # 306-X7369. This hitch is custom fit and bolts directly to your Prius with included hardware. This hitch is the only one available that will match your Prius' 300 lbs tongue weight capacity and give you the strength you will need to carry two e-bikes and the bike rack. It is also the only available option we have that will work with the Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches item # S94FR you purchased last year.

If you need a wiring harness to control the lights on your 2006 SportsRig Micro trailer, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK66VR. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your rear cargo area on both the driver's side and passenger's side.

To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

The Curt Trailer Hitch Receiver item # C11473 you were looking at will fit your Prius and be a great option if your two e-bikes and bike rack weigh less than 200 lbs. This rack however only has a 1-1/4" hitch receiver. If not you will need to go with the Ecohitch.

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Best 2 Inch Trailer Hitch for a 2019 Prius Prime Advanced

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching