Do Springs Come With Replacement SpeedKnob for Yakima HoldUp EVO

Question

Question:

The original speedknob came with a coil spring and two plastic spaces that I don’t see on this replacement knob assy. Are those parts not mandatory to be installed back? If they are mandatory, could you please advice where those should be put at the replacement of the speedknob?

asked by: Masa I

1

Helpful Expert Reply:

Springs do not come with, nor are they required with the Replacement SpeedKnob for Yakima HoldUp EVO # 8880904.

expert reply by: Kyle S

1

Answer 1

I spoke with Yakima about removing the SpeedKnob on the Yakima RidgeBack Bike Rack and she stated that you need to just use more force since the threads are likely stripped. The other option which would not require excessive force would be to take…

view full answer...

Answer 2

Hey Matthew, The replacement speed knob for your Yakima Holdup Evo is part number #8880904. This is a direct replacement for your specific bike rack and is going to work great for you. If you need a new lock core for it as well we have that…

view full answer...

Answer 3

I reached out to my contact at Yakima regarding the speed knob on your Yakima FullSwing bike rack. The wedge on the end of the speed knob is not a seperately available part. You would need to purchace the Yakima #8880904 Replacement SpeedKnob. If…

view full answer...

Answer 4

The part you are looking for is the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks #8880508. This will allow you to replace any SpeedKnob and anti-rattle wedge assembly on your Yakima RidgeBack #Y02457.

view full answer...

Answer 5

I have an answer for you. From the looks of your included pictures (thank you!), you have the Yakima RidgeBack 4 #Y02458. The latch mechanism is integrated in the whole mast assembly, so there are unfortunately no replaceable parts available for…

view full answer...

Answer 6

The Replacement Locking Knob for Yakima SpareTime/SpareRide 2 Bike Rack #8890239 comes with a control key to remove or install a lock core, but this does not have a lock core integrated. It will function without a lock but for the locking feature you…

view full answer...

Answer 7

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 8

The internal dimensions of a dual rear wheel model versus the single rear wheel model will be the same so the Pace Edwards UltraGroove Retractable Hard Tonneau Cover #PE87QJ would be a confirmed fit for your 2023 Ford F-350 DRW with an 8' bed.

view full answer...

Answer 9

The wedge you are seeking is only available in the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks #8880508. Yakima doesn't offer just the wedge as a separate piece.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Do Springs Come With Replacement SpeedKnob for Yakima HoldUp EVO

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching