Parts Needed For Towing a Tear Drop Trailer With a 2022 Subaru Crosstrek

Question

Question:

I have a 2022 Crosstrek Limited, will a Mypod tear trailer hook up to the Ecohitch with proper ball mount extension?

asked by: Thomas

0

Expert Reply:

Yes, the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 is approved for trailer towing with your 2022 Subaru Crosstrek Limited. You will need the correct size ball mount and hitch ball for your Mypod trailer. When we installed this receiver on a 2019 Crosstrek the receiver height was measured at 15". The etrailer Ball Mount Kit # 989900 will give you 2 different height ball mounts and 2 hitch balls(1-7/8" & 2").

The T-One Vehicle Wiring Harness # 118467 will give you a 4-way flat trailer connector that controls the running lights and tail lights on the trailer. If your trailer has a 7-way for electric brakes or a charge line the Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you with the wiring, connector and circuit breakers to power the 7-way. A Redarc Tow-Pro Liberty Brake Controller # RED52VR is needed with the kit if your trailer does have electric brakes.

expert reply by: Bud M

0

Answer 1

I have really great hitch option for your 2019 Subaru Crosstrek that is totally hidden with the EcoHitch part #306-X7365. When you need a hitch you easily attach the hitch opening to the crosstube but when it's not needed the hitch opening gets…

view full answer...

Answer 2

The most hidden trailer hitch option we have for your 2019 Subaru Crosstrek is the EcoHitch part #306-X7365. When in use only the hitch opening hangs below the rear bumper, but when you aren't towing you can easily remove the hitch opening as it…

view full answer...

Answer 3

The most hidden hitch that fits your 2022 Subaru Crosstrek is the EcoHitch part #306-X7365 which is totally hidden when not in use since the lower hitch opening is removable. When you aren't towing the hitch opening comes off of the car and…

view full answer...

Answer 4

It is possible to use the trailer wiring harness, #118467, to wire a back-up camera to your 2011 Subaru Forester. However, there could be issue in how the camera will operate and to the vehicle's wiring. You will have to find a 12-volt power…

view full answer...

Answer 5

If you're looking for a hitch that will install mostly hidden, you're looking for the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7365, which installs behind the bumper and has a removable receiver so that…

view full answer...

Answer 6

We have quite a few installation videos for your 2021 Subaru Crosstrek but sadly none for the Stealth Hitches item #391SUCT18T. I have a better recommendation for a hitch for your Crosstrek. This one has an installation video, will offer you the same…

view full answer...

Answer 7

The best looking trailer hitch that fits your 2018 Subaru Crosstrek is the EcoHitch, part #306-X7365. The cross tube is concealed behind the rear bumper and the receiver tube is visible underneath. Additionally, the receiver tube can be removed when…

view full answer...

Answer 8

You are on the money with the differences between the trailer hitch receivers that fit your 2021 Subaru Crosstrek in regards to completely hidden vs. concealed crosstube. The completely hidden option - the EcoHitch Stealth Trailer Hitch Receiver…

view full answer...

Answer 9

For your 2015 Subaru Forester I would recommend going with a hidden hitch like the EcoHitch part #306-X7216 as only the hitch opening hangs below the rear bumper and the lower hitch opening is removable which means when not in use it's totally…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Parts Needed For Towing a Tear Drop Trailer With a 2022 Subaru Crosstrek

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching