Replacement Surge Brake Actuator For Tie Down Engineering LP 7000 Actuator
Updated 05/17/2022 | Published 05/16/2022
Products Featured in This Question
Question:
Replacing lp7000 not sure if this will fit on top of my current trailer . I think it will fit inside but first hole is a circle meaning it will not allow for surge and there is no second hole that would have to be made
asked by: Fred C
Expert Reply:
We have the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX29FR for disc brakes and the Dexter DX7.5L A-60 Brake Actuator # DX27FR for drum brakes that will be a better option. These will have similar bolt patterns as your Tie Down Engineering LP7000 actuator. These are designed to fit a 3" wide by 4" tall trailer tongue. If you have a different size trailer tongue please let me know so I can recommend a better option.
The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX89FR that you found is for disc brakes. It can be mounted on top of a 3" trailer tongue. You will need to drill for the additional holes to secure it in place and as it does sit on top of the frame you will likely need to change your ball mount to level the trailer.
Product Page this Question was Asked From
Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Manual Lockout
- Dexter
more information >
Continue Researching
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Video: Detailed Breakdown of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: All You Need to Know About the Brake Mounting Flange for 1-3/4" Round Trailer Axles
- Video: Breaking Down the Kodiak Disc Brake Kit-K2R35DKG
- Video: All You Need to Know About the Kodiak Disc Brakes
- Q&A: Adding Reverse Lockout to Trailer with Titan Model 60 Actuator
- Q&A: Parts Needed to Convert Trailer to Surge Disc with Welded on Atwood Actuator and 3,500 lb Axles
- Search Results: disc brake kit
- Search Results: model 60
- Shop: Hopkins Endurance 5-Way Flat Trailer Connector - Trailer End - Ergonomic Design
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Q&A: Recommended Disc Brake Upgrade for Boat Trailer
- Q&A: Choosing Between Painted or GAL-DEX Coated Version of Dexter Trailer Hub
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: bearing buddy
- Video: Replacement Shock Absorber for Dexter Model 60 Brake Actuators Spec Review
- Video: Review of Titan Brake Actuator - T4820000
- Q&A: Converting Titan Model 60 Drum Brake Actuator for Use with Disc Brakes
- Q&A: Recommended Replacement For A Dexter A-60 Brake Actuator With A Broken Safety Cable
- Q&A: How Does Titan Model 60 Actuator Manually Lock Out
- Search Results: titan 60
- Search Results: titan model 60