Availability of 7-Way to 12 Volt Power Socket Adapter for Cooler

Question

Question:

I want to connect my 12v cooler to my 7 pin trailer plug

asked by: Brian P

1

Helpful Expert Reply:

I am not totally sure what power connections your cooler has but we do have a 7-way to 12 volt power outlet adapter with the part # PK11896 that you could use as this plugs into a 7-way that has an active 12 volt power circuit and provides an outlet for 12 volt power. This provides the type of outlet that some refer to as a cigarette lighter port.

expert reply by: Jameson C

1

Answer 1

Hey Laurence, The only adapter I see out there that gives easy access to 12V is the Pollak 7-way to 12v outlet adapter #PK11896. This essentially converts your 7 way into a 12v outlet at the rear of the vehicle. One thing you want to make sure of is…

view full answer...

Answer 2

On Ford trucks, they tend to have a "Smart Tow" package which only sends power to the 12 volt pin when the vehicle is in gear. You can verify it by checking if there's power when your truck is in park versus putting the truck in drive…

view full answer...

Answer 3

Yes the Pollak 7-Way to 12 Volt Power Outlet Adapter part #PK11896 that you referenced will work on a truck like your 2021 Ford Ranger that has the smart trailer connection. This would simulate a trailer being connected so it would be active.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Availability of 7-Way to 12 Volt Power Socket Adapter for Cooler

Product Page this Question was Asked From

Continue Researching