What Is The Maximum Tongue Weight For the EcoHitch Hidden Trailer Hitch Receiver # 306-X7362?

Question

Question:

Currently looking into this part for my 2018 VW Atlas however, I noticed that the Torklift Central website said that this part has a max tongue weight of 500 lbs but that this site says that it is 750 lbs. Is this part actually rated for a tongue weight of 750lbs?

asked by: Tyler S

0

Expert Reply:

I reached out to Torklift to confirm the weight rating of the EcoHitch Hidden Trailer Hitch Receiver # 306-X7362 and they confirmed the maximum tongue weight is 750lbs. They are now aware of the discrepancy listed on their website and are working to fix the issue. Do be sure to verify the maximum tongue weight and trailer capacity on your 2018 Volkswagen Atlas as it does not always have the same rating as the receiver.

The T-One Vehicle Wiring Harness # 118754 will give you a 4-way flat connector that will control the lights on most small trailers you may tow. It will also allow for Auxiliary Lights # C53201 in the event you have a hitch mounted accessory that impairs the view of your tail lights.

expert reply by: Bud M

0

Answer 1

Thank you so much for the photos and all of the info! Currently none of our manufacturers have an adapter that they have tested and approved to work with that connector you found on your 2022 Volkswagen Atlas, so you'll have to cut off that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

What Is The Maximum Tongue Weight For the EcoHitch Hidden Trailer Hitch Receiver # 306-X7362?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching