Which T-One Vehicle Wiring Harness is Correct for a 2022 Kia Sorento

Question

Question:

Hi, I ordered a Tekonsha 118269 based on your website, but it appears to me that the 118838 would connect directly to connectors near the rear of the vehicle and require no disassembly of the car. Thoughts? The 118269 kit I received lists cars dating back to 2007 and I am guessing Kia has improved access to these ports. I don’t see where it would connect.

asked by: Dave

0

Expert Reply:

The T-One Vehicle Wiring Harness # 118269 would be the correct wiring harness if you have the factory tow package on your 2022 Kia Sorento. The # 118269 would plug into your vehicle's factory tow package wiring harness, which is located along the frame rail at the rear of your vehicle. This would be the option that requires the least amount of disassembly of your Sorento.

If you do not have the factory tow package then you would want to use the T-One Vehicle Wiring Harness # TK26FR (which is the 118838). This harness would plug into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.

expert reply by: Scott S

0

Answer 1

Hi Rod; the #118269 you ordered will fit a 2024 Kia Sorento, but only with the tow package port which it sounds like you don't have. This is also designed for models with incandescent tail lights. I'm 99% sure the X-Line comes with LED lights…

view full answer...

Answer 2

In the event your 2023 Kia Sorento SX Prestige plug-in hybrid has the factory tow package wiring you will need either the Tekonsha 4-Way #118269 or 7-Way #TK24FR. You can determine if you have the factory connectors by checking in the rear drivers…

view full answer...

Answer 3

Yes, we do have a 4-way wiring harness for your 2023 Kia Sorento. I recommend the Tekonsha T-One Vehicle Wiring Harness item #118269. This custom fit wiring harness plugs into your Sorento's factory tow package behind your driver's side rear…

view full answer...

Answer 4

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 5

Hello Nolan; the #e98843 fits the 2016-2020 models of the Sorento. You will need a different hitch since there have been changes to the frame that won't allow the old one to fit. We don't have an etrailer hitch for the 2022 but you can use…

view full answer...

Answer 6

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…

view full answer...

Answer 7

Hey Robert, thanks for reaching out! According to Curt the T-Connector Vehicle Wiring Harness #C63RV is compatible with LED tail lights on your 2024 Kia Sorento, so you'll be able to us this to tee in behind your tail lights as opposed to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Which T-One Vehicle Wiring Harness is Correct for a 2022 Kia Sorento

Featured Help Information

Miscellaneous Media

Continue Researching