Installation: T-One Vehicle Wiring Harness for Factory Tow Package on a 2020 Kia Sorento Video

Hi Robert; the Curt #CU94FR is not confirmed to fit the 2024 Sorento. If you have LED lights you will need the #C99DR and if you have incandescent the #C63RV. None of the aftermarket wiring harnesses will fit your 2024 Kia Sorento EX tow package plug…

Hey Steve, we have the Curt hitch part #C37RV that fits your 2025 Kia Sorento Hybrid SX Prestige model. For trailer wiring we only have universal options at this time like with the Curt #C59236.

Hi Chris, Yes, you'll need the Curt Trailer Hitch Receiver #C37RV. This class III trailer hitch has a 4,000lb maximum towing capacity and 600lb tongue weight capacity, but you'll still want to refer to your Santa Fe's owner manual to…

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…

Hello Nolan; the #e98843 fits the 2016-2020 models of the Sorento. You will need a different hitch since there have been changes to the frame that won't allow the old one to fit. We don't have an etrailer hitch for the 2022 but you can use…

Hey Robert, thanks for reaching out! According to Curt the T-Connector Vehicle Wiring Harness #C63RV is compatible with LED tail lights on your 2024 Kia Sorento, so you'll be able to us this to tee in behind your tail lights as opposed to…

Hi Rod; the #118269 you ordered will fit a 2024 Kia Sorento, but only with the tow package port which it sounds like you don't have. This is also designed for models with incandescent tail lights. I'm 99% sure the X-Line comes with LED lights…

Hey Mike, yes the Curt trailer wiring harness part #C63RV does fit the 2024 Kia Sorento S.

Hey Carmin, thanks for reaching out! The hitch and wiring I recommend for your 2024 Kia Sorento SX Prestige PHEV is the following: - Curt Trailer Hitch Receiver #C37RV - Curt T-Connector Vehicle Wiring Harness #C99DR - Mounting Brackets #18144 and…

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

In the event your 2023 Kia Sorento SX Prestige plug-in hybrid has the factory tow package wiring you will need either the Tekonsha 4-Way #118269 or 7-Way #TK24FR. You can determine if you have the factory connectors by checking in the rear drivers…

Yes, the Curt T-Connector Wiring Harness item #C99DR will fit the PHEV model of the 2023 Kia Sorento. This custom-fit T-connector plugs into your Kia's wiring harness, which is located behind the tail lights. To round out your towing setup I…