Which Muffler Is Curt Trailer Hitch for 2012 Fiat 500 Abarth Designed To Work With

Question

Question:

Will this hitch C11347 fit the 2012 fiat 500 Abarth with the pancake-style muffler, not the tubular one?

asked by: Max

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C11347 is a confirmed fit for a 2012 Fiat 500 Abarth with the factory muffler. I have attached a photo of said muffler installed on the vehicle that the trailer hitch is designed to work with. If you have an aftermarket muffler then the hitch may not fit properly.

expert reply by: Conner L

0

Which Muffler Is Curt Trailer Hitch for 2012 Fiat 500 Abarth Designed To Work With
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 5

Yes, Curt trailer hitch #C11347 will fit your 2013 Fiat 500 Abarth. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with…

view full answer...

Answer 6

The Adapter Module for BrakeRite Electric Over Hydraulic Actuator #DX35FR was designed for use on the trailer side of the wiring. If you had this installed on the truck wiring the integrated controller would think a trailer is connected all the…

view full answer...

Answer 7

The Demco Hydraulic Brake Actuator item #DM72VR, you were looking at, is the best option to replace an Atwood 82543. This coupler features a simple-to-use latching mechanism known as the EZ-Latch. With this mechanism, hooking up is as easy as…

view full answer...

Answer 8

The thickness of the rotor on Kodiak 12-Inch Hub-and-Rotor Assembly #KHR12D is 0.930-inch (23.6mm). I confirmed this dimension with my technical contact at Kodiak. Naturally this starting thickness will gradually be reduced from use.

view full answer...

Answer 9

For a hitch that fits your 2024 RAV4 Hybrid I recommend the etrailer #e84ZV. This Class III hitch has a bolt-on installation and comes with a limited lifetime warranty. It also has a concealed cross tube for a nice clean look and a matte black finish…

view full answer...

Answer 10

Yes, it will! The Blue Ox item #BX2805 fits both the manual and automatic transmission models of the 2012 Fiat 500 Pop. Here are some other parts you will need to flat tow your 2012 Fiat 500 Pop: Tow Bar and Safety Chains - Blue Ox Alpha 2 Tow Bar…

view full answer...

Which Muffler Is Curt Trailer Hitch for 2012 Fiat 500 Abarth Designed To Work With

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching