Thickness of Rotor Portion of Kodiak 12-Inch Hub-and-Rotor Assembly KHR12D
Updated 05/22/2019 | Published 05/21/2019
Question:
Dear Etrailer. Could you please tell me what the width of the Kodiak 12inch disc brake rotorItem # KHR12D is? I need the width to see if it will fit in my existing brake caliper. The gap between the brake pads in this caliper is 18mm / 3/4 inch. -Thank you so much for help.
asked by: Morten T
0
Expert Reply:
The thickness of the rotor on Kodiak 12-Inch Hub-and-Rotor Assembly # KHR12D is 0.930-inch (23.6mm). I confirmed this dimension with my technical contact at Kodiak. Naturally this starting thickness will gradually be reduced from use.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- 25580 / 15123
- Marine Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Search Results: kodiak 225
- Video: Curt Class III Trailer Hitch Step-By-Step Install - 2026 Honda CR-V
- Shop: Trailer Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
- Search Results: front mount receiver hitch
- Search Results: trailer hitch
- Search Results: front mount hitch
- Shop: Demco Hydraulic Trailer Brakes - Free Backing - Galvanized - 12" - Left/Right - 7K
- Search Results: oil bath hubs
- Search Results: 4 flat trailer wiring
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Brake Actuator w/ Drop - Painted - Disc - 2-5/16" Ball - Weld On - 20,000 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Breaking Down the Kodiak 12" Hub-and-Rotor Assembly
- Q&A: Recommended Replacement for Atwood 82543 Brake Actuator
- Video: What to Know About the Adapter Module for BrakeRite Electric Over Hydraulic Actuator
- Q&A: Does Adapter Module for BrakeRite Electric Over Hydraulic Actuator Install on Trailer or Vehicle
- Search Results: kodiak rotor
- Q&A: How do I Change from the Dexter Vault to EZ Lube Hubs on Boat Trailer?
- Q&A: Recommended Replacement Caliper For A Kodiak 225
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: Recommendation for Failing EZ Lube Spindle and Vortex Hub
- Q&A: Brakes Compatible With Dexter 81022 Vortex Hubs On a 2024 Load Rite Trailer
- Video: All About the Dexter Disc Brake Assembly
- Video: Ultimate Overview of the Kodiak Disc Brake Kit-K2R526D
- Video: The Low-Down on the Replacement Mounting Bracket for Kodiak Disc Brake Caliper