Does 2016 Subaru Impreza Bumper Need to be Removed to Install EcoHitch
Updated 04/16/2022 | Published 04/15/2022 >
Question:
Hello, Just wondering about the installation of the ecohitch on a 2016 subaru wagon. The instructions seem pretty straight-forward, but... Is it really necessary to remove the bumper fascia? It seems as though the hitch could be positioned and mounted without removing the bumper. Thanks,
asked by: Joshua S
Expert Reply:
There are actually 2 different methods to installing the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 on your 2016 Subaru Impreza; Version 1 that requires bumper removal, and Version 2 that requires hole enlargement.
You can physically lift the hitch into place, yes, but the hardware is a little different when it comes to the install. If you don't want to enlarge any holes on your trunk pan you'll need to remove your bumper to gain access to the opening in your frame so you can drop the mounting hardware into place. If you don't mind enlarging the holes on your vehicle (they will actually be covered by the carpet liner in the trunk) then you can drop the hardware in from your trunk and avoid removing the bumper.
Attached is a link to the installation instructions for you to see how both methods are done.
If you let me know what you plan on using the hitch for I'd be more than happy to make additional recommendations!
Product Page this Question was Asked From
EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Setting up the Curt Trailer Hitch Receiver on your 2015 Subaru Impreza
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: Mount: Curt Trailer Hitch Receiver on a 2024 Kia Niro PHEV
- Video: etrailer Class III Trailer Hitch Step-By-Step Installation - 2025 Kia Telluride
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Tongue Weight Capacity of EcoHitch 306-X7241 For 2013 Subaru Impreza
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Video: Installing the Curt Trailer Hitch Receiver on a 2025 Toyota RAV4
- Search Results: trailer jack
- Shop: Brake Controller
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Measure for Trailer Hitch Drop

