Will B&W Turnoverball Gooseneck Hitch Fit 2019 Ford F-250 With Factory Inner Plates Welded to Frame
Updated 07/26/2025 | Published 04/14/2022
Products Featured in This Question
Question:
My truck has gooseneck mounts that are welded on from the factory on the inside of the frame rails and I am wondering if this will still fit on my truck? Can those be used or do they have to be removed?
asked by: Matt H
Expert Reply:
Excellent question and yes, even with the inner plates already welded to the frame of your 2019 Ford F-250 Super Duty, you can still use and install the B&W Turnoverball gooseneck on your truck; the correct fit for your '19 F-250 is the following:
- B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1116
If you take a look at the cut out of the instructions I added, you can see that you will simply not use the inner side plates that come with the Turnoverball # BWGNRK1116, and instead utilize the side plates already on your truck. That's the only difference in the installation and everything else will be the same.
You made a smart choice with the Turnoverball, as it is easily the best and most well-constructed gooseneck hitch for your F-250, and the only other things you may need are an offset ball if you have a short bed, the 4" Offset Ball # BWGNXA4085, and a gooseneck wiring harness, the Curt 5th Wheel/Gooseneck Custom Wiring Harness # C57008.
(click to enlarge)
Product Page this Question was Asked From
Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 7' Long
- Custom Fit Vehicle Wiring
- 5th Wheel and Gooseneck Wiring
- Vehicle End Connector
- 7 Blade
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Q&A: Looking To Replace 7-Way Plug In Bed OF 2024 Ford F-450
- Video: Review of Westin Replacement Hardware Kit - W28FM
- Shop: Vehicle Lights
- Shop: EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector
- Shop: Replacement Hardware Kit for Westin HDX Grille Guard
- Shop: Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard with Punch Plate
- Shop: Replacement Mounting Hardware Kit for Westin HDX Grille Guards
- Shop: Replacement Hardware Kit for Westin HDX Grille Guard - Black
- Shop: Replacement Hardware Kit for Westin HDX Grille Guard
- Q&A: Will Curt T-Connector Vehicle Wiring Harness Fit 2025 Ford F-350
- Q&A: B&W Turnoverball and Gooseneck Wiring for 2025 Ford F-250
- Q&A: Need To Add 7-Way Plug To The Bed Of A 2026 Ford F-250
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Fifth Wheel Wiring Harness Recommendation for 2020 Ford F-350 Super Duty With Prep Package
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Are Inner Brackets of B and W Gooseneck Hitch Needed When Installing In 2026 Ford Truck
- Article: Best Air Bag Suspension 2025
- Q&A: Recommended Air Bags for a 2025 Ford F-250 Towing a 5th Wheel Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
Richie C.
7/25/2025
Trying to install hitch on a 2019 f250 with factory inner plate. My bolt holes don’t seem to be lining up on crossmember brackets. Any help appreciated