Does Gear Box of Trailer Valet Trailer Jack TV94FR Stick Out Past Tube of Jack
Published 04/08/2022
Question:
When I the tailgate down on the truck the clearance is 11 1/2 between the mounting hole in the trailer coupler and the bottom of tailgate . . . .but it is clear straight up from coupler mounting hole past the tailgate. So the round tube of the jack will miss the tailgate . . . .but on the top of the jack is a square gearbox that is where the crank handle connects and it is larger than the round 2 1/4 jack tube. How big is that gearbox where the handle attaches ? So draw a square box in the center draw a round circle . . . .that is the view looking up . . . .how much bigger is that box that sits on top of the round tube. Will the tailgate clear the gearbox as you open the trucks tailgate. . . .I know it will clear the round section of the jack . . . .not sure it will clear the gearbox . . . .will it ? Do you have diagrams that show the dimensions of the gearbox/sidewinder ? The most important measurement is the trailgate to the edge of the round tube is 2 1/2 clearance between the tailgate and the 2 1/4 inch round jack tube . . . . .so the tailgate misses the jacks round tube by 2 1/2 inch will it miss the sidewinder gearbox by ? ? ? inches
asked by: Steve
Helpful Expert Reply:
The great thing about the gear box on top of the Trailer Valet JXC part # TV94FR that you referenced is that it does not stick out past the main jack tube forward or back once installed so you would need to have have additional clearance. If you check out the picture I attached you can see that the front and back of the gear box are flush with the jack tube.
(click to enlarge)
Product Page this Question was Asked From
Trailer Valet JXC Drill Powered Jack w/ Footplate - A-Frame - 14" Lift - 1,600 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- Sidewind Jack
- 1001 - 2000 lbs
- Drill-Powered Jack
- Manual Jack
- 14 Inch Lift
- Bolt-On
- With Rectangle Foot
- Trailer Valet
more information >
Continue Researching
- Search Results: drill~powered jack trailer jack
- Video: Review of etrailer Trailer Jack - Manual Sidewind A Frame Jack Drill Adapter - e88GV
- Search Results: rear trailer jack
- Shop: etrailer Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2,000 lbs
- Shop: etrailer Sidewind Trailer Jack w/ SnapPad and Drill Adapter - A-Frame - 14" Lift - 2,000 lbs
- Shop: SnapPad TJ Trailer Tongue Jack Pad
- Shop: Trailer Valet JXC Drill Powered Jack w/ Footplate - A-Frame - 14" Lift - 1,600 lbs
- Search Results: 15 trailer wheels
- Search Results: trailer valet trailer jack
- Search Results: trailer jack
- Search Results: 15 trailer rims
- Search Results: tpms system
- Shop: Aluminum Eagle Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Matte Black
- Shop: Replacement Pad for SnapPad Jack Stand Pad System - 11-1/2" or 12" Round Jack Foot
- Video: Air Lift LoadLifter 5000 Ultimate Air Helper Springs Review
- Shop: etrailer Trailer Tool Box - A-Frame - Aluminum - 3.4 Cu Ft - 34" Long - Matte Black
- Q&A: Trailer Valet JXC Trailer A-Frame Jack For 2018 Nucamp Tab400 Travel Trailer
- Q&A: What Should the Tire Pressure be for a 225/75-15 Trailer Tire with Load Range E Rating
- Q&A: Are Westlake Trailer Tires Quality Tires
- Q&A: Replacement A-Frame Trailer Jack for Sidewind Style
- Q&A: Can Trailer Valet Trailer Jack - STC-V211 Be Taken Off Without Removing Mounting Bracket
- Video: Optronics LED Trailer Lights | Straight from the Manufacturer
- Video: Checking Out the Fusion LED Trailer Tail Light
- Video: Comprehensive Review: Fusion LED Trailer Tail Light
- Video: An In-Depth Look at the Light Guide LED Truck/Trailer Light
- Video: Fusion LED Trailer Tail Light Review
- Q&A: Will Goodyear Endurance ST225/75R15 Fit 2024 Winnebago Access 26RL
- Q&A: Parts Needed to Install a Autowbrake and 7-Way for Towing w/a 2022 Toyota RAV-4 Hybrid
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Towing a Trailer? Let's Talk About Brake Controllers
on Trailer Jack
