Demco eZ-Latch A-Frame Coupler Replacement for an ATC Aluminum Trailer  

Question:

Expert Reply:

Hey Tyler! I recommend the Demco eZ-Latch A-Frame Coupler # DM14793-81 for your ATC trailer. It has a 10,000 lb capacity, fits a 2" hitch ball, and automatically latches when you lower it onto the ball.

This coupler uses six mounting holes, three on each side, with the side holes spaced 3" apart on center. Since your existing coupler only has four bolts, you'll likely need to drill additional mounting holes to install it. Just make sure ATC approves any modifications to your aluminum trailer frame.

If you can send me pictures of your existing coupler and the mounting-hole measurements, I can check for a replacement that matches your current bolt pattern. However, it wouldn't have the eZ-Latch feature.

Is your original coupler damaged or are you just wanting to upgrade to the eZ-Latch?

expert reply by: Robin H

0

Demco A-Frame
(click to enlarge)

Tyler N.

11/10/2026

Hello. I don’t have to have a quick connect. Preferred but I need to replace old one. It is rusted and doesn’t function as it should. Any other suggestions without drilling new holes? I am not concerned about brand. How can I send a picture?

Robin H.

11/11/2026

@TylerN thanks for the picture! I can see how your existing coupler is mounted, but I'll need the center-to-center measurements between the mounting holes to find a replacement that won't require drilling. Can you also confirm whether you have a 2" or 2-5/16" hitch ball and the GVWR of your trailer? That should help me narrow down the options.

Tyler

11/11/2026

@RobinH thanks for the reply. I ordered the Curt with locking pin from your site. I appears to be what I need. Thank you.