Hands-On with the Fusion LED Trailer Tail Light Video

The AT15775 part that you referenced was a replacement latch repair kit from Atwood for yoke style A-frame couplers. This kit is no longer available as Atwood was bought out and their parts were discontinued. For a replacement yoke style coupler…

The closest match would be #STL211RB. It doesn't have a clear lens or Glo feature though. The grommet for this light is #A70GB and you would need pigtails #A47PB and #A49PB to plug into the back of it.

We have the Brake Buddy 32220 reverse solenoid available with the Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts item #TK71-755-00. I have included a link to this part and also a couple installation and review…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, you can replace your load range C tires with load range D tires without issue. It will only become any issue when you go down load ranges, not up. The tires will have the same overall diameter as long as they are the same size regardless of…

The load range has to do with the horizontal and sidewall strength of a trailer tire. The C range tires are 6 ply and the D range tires are 8 ply. Because you are operating at half of the spring capacity of your trailer, bumping to a higher load…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

In the attached diagram the A measurement is actually the distance from the center of the spring hangers for a single axle trailer. The spring eye to spring eye measurement for your leaf springs will be slightly different. The B measurement that you…

The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light #BUL43CB or Trailer tail Light #STL55RB which are actually 4-5/16" diameter x 1-15/16" thick. These are designed to fit the Rubber Grommet for 4"…

Thank you for your recent purchase from etrailer. The grease seal included with this hub kit has an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. This seal should be fully seated into the rear bore of the hub so that it is…

What you can do is apply something like Liquid Electrical Tape, #SWC50122, which will insulate, seal, and waterproof electrical connections. I would still recommend wrapping any connections with actual electrical tape as well for extra protection.…

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…