What Trailer Hitch Should I Put On My 2009 BMW 335I Convertible

Question

Question:

Dear Support, I hope all is well. I need a trailer hitch for towing! My cars are: - 2009 BMW 335I Convertible - 2006 BMW 330I 4-Door Sedan Please advise. Thank you

asked by: Zbigniew

1

Answer 1

Hey, great question and adding brakes to that ATV trailer is a really smart move, especially behind a Tacoma. You’re on the right track looking at a kit like the self-adjusting electric brake assemblies such as part #TX97ZJ electric trailer brake…

view full answer...

Answer 2

Hey Axel! The highest tongue weight rating for a hitch on the 2008 BMW 335i is 350 lbs found on the Stealth Hitches #SH44VR. It will not be able to hold your 400 lb motorcycle and carrier. Even if it could, I doubt your 335i is rated for 400 lbs of…

view full answer...

Answer 3

While the installation of the Stealth Trailer Hitch, item #SH44VR on the 2009 BMW 3 Series Sport Wagon is quite involved, it does not require any fascia trimming. For installation, it requires temporary removal of bumper/fascia and permanent removal…

view full answer...

Answer 4

Unfortunately we don't have 1984 Westfalia Vanagon available to confirm fitment of the Curt Adjustable Trailer Hitch Receiver, #C13701. But this can adjust from 18" to 51" so as to adapt to multiple applications. This of course would…

view full answer...

Answer 5

According to my contact at Curt, the Curt Class I Trailer Hitch, #C11033, will fit on your 2006 BMW 325xi as long as it is a 4 door sedan. If it is a wagon model, then you will need the Stealth Trailer Hitch, #SH88VR. I have attached the installation…

view full answer...

Answer 6

Yes, the Stealth hitch part #SH88VR does fit your 2011 BMW 328i xdrive sedan and would provide a 2 inch hitch for a bike rack. This comes with other components you may not need like wiring and a ball mount so you might be more interested in the…

view full answer...

Answer 7

Hey Cody! The only hitch available for your 2011 BMW 335D is the Stealth Hitches Hidden Rack Receiver #SH64VR. This is designed for accessories like a bike rack and has a max tongue weight of 350 lbs. Do you plan on towing? If so, you need the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

What Trailer Hitch Should I Put On My 2009 BMW 335I Convertible

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching