What Material is the 30 AMP SmartPlug RV and Marine Power Inlet and Connector Made From

Question

Question:

I'm looking at your 30 amp smartplug. what material is that made from?

asked by: Jonas G

0

Expert Reply:

The 30 amp SmartPlug RV and Marine Power Inlet and Connector, # SM67FR that you linked to is made from highly polished Marine-Grade 316 Stainless Steel. The electrical pins are nickel-plated brass for maximum conductivity with the internal electrics being fully encased in thermal epoxy. This makes them 100% weatherproof.

There is also a durable plastic option in three colors, # SM77FR for white, # SM27FR for black and # SM87FR for gray. All are Made in the USA. Please note the linked product review video below.

expert reply by: Michael R

0

Answer 1

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hey Mike! The Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is designed to work with 45000, 47000, and 48000 air conditioners. Based on those numbers I'm assuming you those are 38000 series, but the model number doesn't always…

view full answer...

Answer 6

Hey Terry, the Furrion Chill Variable Speed AC part #FR97TQ that you referenced would be what you would want. This would require you to use it's included air box and thermostat though and would not be able to be controlled by what you have…

view full answer...

Answer 7

Hi Mike; the SmartPlug RV and Marine Power Inlet and Connector #SM67FR uses a 316 cast stainless steel housing, which offers maximum corrosion resistance. That’s the main reason it’s listed as a marine product. It can be used on an RV as well, but…

view full answer...

Answer 8

Hello Jack, Yes, you can absolutely lock it to the pedestal. If you are going with the Watchdog Power Center Surge Protector and Voltage Booster - Bluetooth and WiFi - 30 Amp #HU84ZR, I would use our etrailer Cable Lock - 10' Long - 5/16"…

view full answer...

Answer 9

Hey Gary, welcome back! It looks like your 2025 Forest River Flagstaff E-Pro 20FBS has the Lippert Quick Drop stabilizer jacks. You'll need the SnapPad SnapJack QD RV Stabilizer Jack Pads item #SN44VR. Your jack feet are going to be removed and…

view full answer...

Answer 10

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 11

Hey Jamie, the Roadactive suspension kit part #RAS3611-HD would be your best option. Of all of the suspension enhancement kits this is my favorite. It gives you adjustable suspension support that's maintenance-free, is easy to install, and unlike…

view full answer...

Answer 12

Welcome back Ben and thanks for the information! The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump item #FR27TQ in black or item #FR59TQ in white would be great options to replace your GE ARH15AACB. The Furrion Chill Cube systems…

view full answer...