Snow Plow Compatible With EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH59FR on 2013 F-250

Question

Question:

Hello I’m very interested in the eco hitch hidden front reciever hitch for a 2013 f250. I’m wondering if I decided to buy a plow w/plow frame down the road if it would work with this particular reciever hitch?

asked by: Ben

0

Expert Reply:

The best route would be to use a snow plow like the Detail K2 Elite Snowplow for 2" Hitches # K2AVAL8826ELT with the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH59FR on your 2013 Ford F-250. This way you will not need to purchase separate mounting brackets or verify if that particular kits mounting brackets are going to be compatible as different manufacturers will use different brackets.

expert reply by: Bud M

0

Answer 1

Although it mounts to the sides of the front frame members instead of the tow hooks, the EcoHitch #EH59FR front mounted receiver would install so that the receiver tube sits behind the license plate holder. The Curt #C31018 and Draw-Tite #65049 would…

view full answer...

Answer 2

The Detail K2 Elite Snow Plow part #K2AVAL8826ELT that you referenced was designed to work with front hitches that install lower on the vehicle than your ecohitch. This would hold the plow much too high and would not work. You'd need a hitch like…

view full answer...

Answer 3

Yes! The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #31604 is confirmed to fit your 1997 Dodge Ram 2500 4x4 with the Cummins engine. The hitch comes with all mounting hardware included. Also, you will be able to attach the Detail…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Answer 9

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Answer 10

Hello Danny, I’m really glad you mentioned the Equalizer! When sway is the issue, that one and the Weigh Safe are definitely my go-to options. They both have 4 point sway control, with straight spring bars and frame brackets. They can be a little…

view full answer...

Snow Plow Compatible With EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH59FR on 2013 F-250

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching