Bulldog Winch Electric Winch BDW20011 Review

content loading



Customers compare BDW20011 to these similar products




Products Featured in this Video



Review of Bulldog Winch Accessories and Parts BDW20011


Today we're going to review part number BDW20011. This is the Bulldog 2-inch by 2-inch hitch mounted winch mounting plate with the handles. This part will provide a portable and flexible mounting solution for your winch. It has the fully welded heavy duty frame and even the handles. If you'll notice right here between the winch mount and the receiver tube, it is double gusseted on top and on the bottom to give you extra strength. It is designed to fit any standard 2-inch by 2-inch hitch receiver.

This can be used for truck winches up to 12,000 pound with the standard 10 by 4-1/2-inch mounting bolt pattern and it will also fit smaller 6-1/2, 4-1/2-inch bolt pattern winches. I just want to try to show you the holes you see in the bottom of the plate there. When you say the mounting patterns, you're talking about these mounting holes. The outer holes, the distance between them center-to-center is 4-1/2 inches and on the outer ones you can see it would be 10 inches and then on the inner ones would get you your 6-1/2. It will use either 10 by 4-1/2-inch mounting bolt pattern or the 6-1/2 by 4-1/2-inch mounting bolt pattern. Now on the very front .. let me turn this around ...

I'm going to show you the holes on the front. You'll notice the holes here. These are at a 10-inch pattern center-to-center so this will accept any of the fairleads that have a 10-inch mount pattern. It does come with this adapter plate and the included hardware to install it. If by chance you're going to use a fairlead that has an 8-inch mount pattern, if you look at these inner holes there it would be 8 inches.

All you have to do is attach this right to that and then attach your fairlead to there and you can use the smaller 8-inch mount pattern if you prefer. Now one last thing I do want to let you know is the capacity of this mounting plate will be based on the capacity of the vehicle hitch receiver. That should do it for the review of part number BDW20011. This is the Bulldog 2-inch by 2-inch hitch mounted winch mounting plate with the handles. .


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D
Video by:
Chris R
Installed by:
Jared G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.