Trailer Hitch that Fits 2022 Kia Niro Full Electric

Question

Question:

looking for a hitch for a 2022 kia nero full electric

asked by: John

0

Expert Reply:

We have the Draw Tite hitch part # 36600 which fits the full electric models of the 2022 Kia Niro.

expert reply by: Jameson C

0

Lorna

4/13/2025

Do you have a 2” receiver that will fit my Kia Niro ev 2020? Thanks!

Jameson C.

4/13/2025

@Lorna I wish we had a hitch fit for your 2020 Niro EV but looks like we don't have any options currently.

Lorna

4/14/2025

@JamesonC , While waiting for your reply, and Before receiving this reply from you I spoke to Randall at your company yesterday, and he did say that the #36600 would not fit the Kia Niro Hybrid, but it would fit my EV…are you sure it won’t?? If not, Anything you can suggest so I can transport my 2 e-bikes that weigh 60lbs each? Thank you, Lorna

Jameson C.

4/14/2025

@Lorna You are right it does fit. It looks like it wasn't originally listed for it but people have found that it does work on the EV models.

See All (7) Replies to Lorna ∨

Answer 1

We do have a trailer hitch option for a 2020 Kia Niro EV but not the PHEV. If you have the EV then you can use the Draw-Tite Trailer Hitch Receiver part #36600 which is our only available option. It has a 1-1/4" opening which will work great for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Trailer Hitch that Fits 2022 Kia Niro Full Electric

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching