Which Trailer Hitch Can Tow the Most On a 2015 Kia Sorento LX

Question

Question:

Hi! I’m new to towing and want to get a travel travel trailer. I’m looking for the max weight I can pull with my 2015 Kia Sorento LX 4- Cylinder 7 seater w/ 2 wheel drive / Trim Package H9 please. My owners manual says max 1650 lbs for LX with, but I saw much higher weights on your site under my model. Also which tow hitch on your site will be the safest if I’m towing whatever the max weight for my model is please?

asked by: Nicole M

0

Expert Reply:

The trailer hitch I recommend for a 2015 Kia Sorento LX is the Curt Trailer Hitch Receiver part # C13152 which is a direct bolt-on fit with no drilling required. It has a 6,000 lb weight capacity but this rating comes from the hitch only which is tested separately from the vehicle. If the vehicle is rated lower which it will be in 99% of cases then that is the rating you'll need to abide by. Therefore, your towing capacity is 1,650 lbs per the manual regardless of which hitch you choose.

For a trailer wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118583 which is plug-in-play.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Jerit, congrats on the new car. We've got a couple of hitches that fit the 2026 Subaru Crosstrek Wilderness. The etrailer Trailer Hitch item #e98912 is going to be the most affordable option. This custom fit class III hitch has a 2"…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hey Eric, yes the Curt hitch part #C37RV does fit the PHEV versions of the 2026 Kia Sorento like you have so it would work great. I attached a picture of a review from a customer that installed it on a PHEV for you to check out as well. Are you…

view full answer...

Answer 10

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Which Trailer Hitch Can Tow the Most On a 2015 Kia Sorento LX

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching