Vacuum Connector for Use with Demco Air Force One and 2021 Ford Expedition

Question

Question:

Can you provide info on installing a Demco AF1 on a 2020-21 Ford Expedition. Have all the necessary parts from you guys including the new vacuum connector for the Eco Boost engine. Vacuum booster line is hard plastic. Thanks for the help.

asked by: Steve O

0

Expert Reply:

Since you have a hard vacuum line on your 21' Ford Expedition you'd want the Demco Vacuum Connection Tee Fitting # DM6257 when installing the Demco Air Force One # SM99209.

expert reply by: Jameson C

0

Answer 1

I went ahead and reached out to my tech at Demco, and he confirmed that the only thing you need to install the Air Force One braking system itself with your 2019 Ford F-150 King Ranch is the to your motorhome is the Demco Connection T Fitting…

view full answer...

Answer 2

We do! The parts you're describing for the Demco SBS Stay-IN-Play DUO #SM99251 install on a 2022 Ford Ranger are the following: - Demco Vacuum Connection Tee Fitting #DM6257 - Replacement Vacuum Check Valve #RM-452142

view full answer...

Answer 3

I spoke with Demco and their technician stated the easiest way to install your Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional Item #DM26VR is to cut the 90 degree angle fitting attached to your…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Vacuum Connector for Use with Demco Air Force One and 2021 Ford Expedition

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching