7-Way For 2022 Nissan Frontier Without Tow Package For Brake Controller

Question

Question:

Hi I was interested in finding a factory style wiring harness for a 2022 Nissan Frontier without a factory tow harness. This includes the brake controller, relay kit and 7 and 4 way connector. If you could give me insight on what I need that would be appreciated.

asked by: Mark

1

Helpful Expert Reply:

We can get your 2022 Nissan Frontier without the factory tow package set up with a 7-way and brake controller, and for the 7-way there is one part that is needed, though it will not be factory style, it will be a 7-way that you plug in and will attach with a mounting bracket. The correct part for your '22 Frontier is the following:

- T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266

This has the needed relays to activate the tow package, and to mount it to a hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75282 you simply need a bracket, the Mounting Bracket # PK12711U.

Then for a brake controller with a simple adapter, the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Plug-and-Play Wiring Harness # RED39FR.

expert reply by: Kyle S

1

Answer 1

To add a hitch to your 2023 Nissan Frontier you are going to want the Curt Trailer Hitch item #13241. This hitch is custom fit and bolts to your Frontier with included hardware. I really like the Curt hitch because it installs behind your rear bumper…

view full answer...

Answer 2

If you want to use the Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional #RED44FR, you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers #RED39FR

view full answer...

Answer 3

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

view full answer...

Answer 4

To install a Class III hitch like the Draw Tite part #75282 on your 2013 Nissan Frontier you will use the existing weldnuts that are on the truck frame. The weldnuts are the threaded holes you have already found on the frame. I attached a picture…

view full answer...

Answer 5

Correct; the holes will already be there on your 2019 Nissan Frontier when installing any of the trailer hitches that fit this truck. If you take a look at the accompanying photo you can see where these holes are being pointed out by our installer.…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver #75282 will have the following bolt hole dimensions for your 2015 Nissan Frontier. The Bolt holes from drivers side to passenger side frame rails are 43-5/8" on center. The holes running from front…

view full answer...

Answer 7

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part #75282 is a great option for your 2019 Nissan Frontier. It is rated for up to 750 lbs of tongue weight and is a nice concealed cross tube design so the only part of the hitch that is…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this installation…

view full answer...

Answer 10

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 11

Those are the wires for the brake magnets. You will need to connect the black wire to the brake controller output wire on your trailer connector and you are correct the white wire will need to be grounded to a clean metal surface on the trailer. I…

view full answer...

Answer 12

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

view full answer...

7-Way For 2022 Nissan Frontier Without Tow Package For Brake Controller

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching