Replacement PD4590CSV Converter

Question

Question:

I have a pd4500k18l panel 90amp. Looks like the picture I sent. Will the pd4500csv 90amp replace the original.

asked by: Ronald B

1

Helpful Expert Reply:

The picture that you sent in is of a PD4590CSV. The Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp # PD4590CSV is also a PD4590CSV. So if you are asking if that can replace what you currently have then the answer is yes.

expert reply by: Scott S

1

Progessive Dynamics 4590CSV
(click to enlarge)

Answer 1

Hi Ian; the #PD4590CSV is for lead acid and AGM batteries. I'm sorry to say that this particular converter section isn't one with the lithium switch you're referencing. Since you want to use it with lithium you actually need the…

view full answer...

Answer 2

The Progressive Dynamics #PD4590CSV is designed as a replacement for the Progressive Dynamics RV Power Control Center #PD4590K18LS8. It is not made as a replacement for the WFCO 9990, and unfortunately we do not offer a converter section that will be…

view full answer...

Answer 3

Yes, you will be able to use the Replacement Lithium Converter #PD4590LICSV on your Progressive Dynamics PD4590K18LS2. I confirmed this information with Progressive Dynamics.

view full answer...

Answer 4

To replace just the converter section of your PD4590 series power center you'll need part #PD4590CSV. This is a direct factory replacement for a 90 amp PD4500-series power center, like you have.

view full answer...

Answer 5

The Replacement Lithium Converter #PD4590LICSV is only for use on Lithium batteries. They offer the Replacement Converter #PD4590CSV for use on lead acid batteries. There is no switch on either converter which will allow you to charge the other type…

view full answer...

Answer 6

The design of the Progressive Dynamics 4000 Series Mini RV Converter #PD4045KA hasn't changed much, but the key is to look for the converter section. The switch is located on the converter's circuit board and will have in white "LA"…

view full answer...

Answer 7

The switch you are referencing is a bit confusing right now. That is because some of the converters have the switch and some do not. In this case, the Progressive Dynamics REL 90A 4500 Series Inteli-Power Converter Section #PD4590CSV does not have…

view full answer...

Answer 8

Hey David, so we don't have that at this time so you would need the part #PD4590CSV if it's a Lead Acid battery or the part #PD4590LICSV for if it's a lithium.

view full answer...

Answer 9

I spoke to Progressive Dynamics, the Progressive Dynamics REL 90A 4500 Series Inteli-Power Converter Section part #PD4590CSV is a fit for you 4590 panel. You have an older style panel which uses a different fan layout but the above will fit and is…

view full answer...

Answer 10

For charging lithium batteries you will need the Replacement Lithium Converter #PD4590LICSV for your Progressive Dynamics power center. The Replacement Converter Section #PD4590CSV is for lead acid and AGM batteries.

view full answer...

Answer 11

Yes. Even without the switch, you'll just need the Progressive Dynamics Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590LICSV to give you the ability to charge and maintain lithium…

view full answer...

Answer 12

We have great options for circuit board converter boxes that will fit your 2006 SV291 Forest River travel trailer. We have two different configurations with different amperage ratings based on the power requirements of the RV. We have the vertical…

view full answer...

Replacement PD4590CSV Converter

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching