A cracked shower pan lets water seep behind your walls and flex under every step. This 36" x 30" ABS replacement fits front center drains and includes a foam base for firm support, helping keep water contained and your footing solid.
Replacement jobs usually stall out when the pan doesn't match the opening or the drain lands in the wrong spot. This pan is sized at 36" long x 30" wide with a front center drain setup, a 2" drain hole, and the drain centered 6" from the front edge. When your existing layout matches those numbers, you can set the pan in place, connect a standard 2" drain strainer (sold separately), and get the shower working again without rebuilding the whole space.
Shower pans usually fail at the floor when the base doesn't carry the load evenly. This one uses a pre-installed foam base that supports the pan and keeps the bottom seated securely and evenly during installation. Once it's set on a prepared surface, the floor stays supported underfoot and the pan keeps doing its job when you step in, rinse off, and move around inside the shower.
Water escaping at the edges turns a simple replacement into wall repair if the pan doesn't control where that water goes. The 3-sided flange blocks water from seeping behind the pan and into the wall area while the 5-3/8" deep pan contains the wash area below. With the edges sealed during install, water stays inside the shower footprint and the surrounding wall area stays ready for the next use.
Slick shower floors get sketchy fast once soap and water build up. The textured anti-slip floor gives your feet more traction, and the ABS plastic surface is scratch-resistant for a pan that sees regular traffic. You can step in, turn around, and rinse off with more control instead of tiptoeing through the shower.
Sometimes the old pan isn't the only part that needs attention, and piecing the space back together can leave the job feeling half done. This white ABS plastic shower pan installs with a screw-on setup, and it can be paired with a new shower wall (sold separately) when you want to update more than just the base. Once the pan is in and the rest of the shower is finished around it, the whole setup is ready for daily use instead of looking like a patched repair.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer.com. Let's take a look at our specialty recreation RV shower pan. It's got what's considered a front center drain and it's a 30-by-36 inch, in white color. Now, folks, this shower pan can replace or upgrade the shower pan in your RV or camper's bathroom. It uses a four-sided flange installation and that's gonna help prevent water from seeping behind the pan and damaging the wall or floor.
It has a nice textured anti-slip floor. It's gonna provide traction so you don't fall. It does feature a pre-installed foam base. Let me spin this around. So this foam base serves multiple purposes.
It's gonna prevent the shower pan from cracking. It's gonna give it some stability and support. And it's also gonna dampen sound (knuckles rapping) if you accidentally drop something in the shower while you're doing your thing. It's made of a durable white ABS plastic, it's scratch resistant. It is lighter and more environmental friendly than fiberglass, especially if you have to repair 'em or get rid of 'em in the future.
And it's a simple screw-on installation. There is no hardware included, you would need to get that separately. Now another thing I wanna point out is if you we inchesre holding this flat and looking on it, it does have on that foam a light slant to it, you can see, and that's made that way on purpose. That way, the water obviously can flow down to that front center drain hole. Now that center drain hole is your standard two-inch hole, and once again, it's a 30-by-36 by about 5 inches deep on the shower pan measurements.
Well folks, that's gonna wrap it up for our quick look together today. I'm Steven. Thanks so much for your time. Thanks for watching, and have a great day.
Fast delivery
Sturdy and well made. The shower pan should last a long time. Made in the USA is a big plus!
Great Transaction
It's a perfect replacement for my OEM pan in my Lance trailer. Excellent quality.
This will work well in our 6X12 Cargo Trailer Camper conversion. It is a work in progress but fits well in the corner.
Appears to be an excellent product. Can’t wait to get it installed!
Shower pan fit perfect in the area.
It arrived in perfect condition exactly what I was looking for thank you
The required dimensions for my project were met, The quality of the shower pan were very good. customer service was also very good. great transaction, thank you for good service.
Better that the factory hoses.
Got here quick and undamaged
Exactly what I needed, fast service, very nice email keeping me updated. Will order from them again
arrived in perfect condition and on tim e!
Do you have a question about this RV Showers and Tub?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.