Replacement E-Z Lube Grease Cap and Plug for 2005 Casita Travel Trailer
Updated 02/02/2022 | Published 01/29/2022 >
Products Featured in This Question
Question:
I have a 2005 Casita camper with a Dexter E Z lube axle. What size dust cover and rubber stopper do I need?
asked by: Nelson K
Helpful Expert Reply:
In order to determine the correct E-Z Lube grease cap for your Dexter axle you are going to need to measure the center of the hub where the grease cap is going to fit. I recommend using digital calipers like the # PTW80157 in order to get an accurate measurement.
Once you have your measurement you can match it up to the correct grease cap which comes with the plug. The # RG04-040 will fit a hub bore of 1.99 inches, the # RG04-080 will fit a hub bore of 2.44 inches, and the # RG04-120 will fit a hub bore of 2.72 inches.
I have attached some video reviews as well as a link to our entire selection of E-Z Lube grease caps that you can check out.
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 21~42~1
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: 2.44" OD EZ Lube Grease Cap - Drive In - Qty 1
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Trailer Hub Grease Cap with Rubber Plug, 2.72" - Drive-In for EZ Lube Axles - Qty 1
- Shop: Replacement Trailer Hub Bearing - 25580
- Search Results: dexter hubs
- Search Results: 8~219
- Search Results: dexter seal 10 36
- Search Results: trailer lights tester
- Search Results: seal
- Search Results: dust caps
- Video: Review of Curt Trailer Breakaway Kit - Replacement Battery - C52023
- Video: Curt Soft Trac Trailer Breakaway Kits Replacement 12-Volt Battery Review
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug Spec Review
- Q&A: Replacement Grease Cap Rubber Insert For EZ Lube Grease Caps
- Q&A: What Size Hole Does the Grease Cap Plug RG04-010 Fit
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if I Have an EZ Grease Hub or a Standard Hub
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Brakes and Bearings do I Need for My PJ Dump Trailer with Tandem 7K Axles?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Hub and Drum Assembly for a 6x12 Car Mate Enclosed Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer




