Installation of the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems
Published 01/26/2022 >
Products Featured in This Question
Question:
I have an ice castle with a hydraulic frame, and I bought a WDH and pole tongue adapter from you guys. Im wondering if you could help me of where to install the tongue adapter on the hydraulic tongue? Thank you very much
asked by: Austen
Expert Reply:
For the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems, # EQ95-01-5950 you will position the cross beam on the trailer tongue with the included hardware and brackets. Then use your Owner’s Manual to the Fastway e2 Weight Distribution, # FA92-00-1000 to set up and adjust correctly. Please note the attached image for positioning and the linked installation instructions.
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: blue ox swaypro
- Search Results: pole tongue adapter
- Video: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control Feature Review
- Video: Comprehensive Review: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control
- Video: The Low-Down on the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems
- Q&A: Weight Distribution Hitch Recommendation for a 7K Enclosed Cargo Trailer with Aluminum Frame
- Q&A: How to Select Weight Distribution System for Snowmobile Trailer with Varying Tongue Weight
- Q&A: Can Weight Distribution Shank be Used Upside-Down to Keep Trailer Level When Hitched
- Shop: Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Q&A: Where Can I Get A Torque Wrench That Goes Up To 450 ft/lbs?
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: weight distribution hitch
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR



