Does 2015 Ram 3500 Have to Have DEF and EGR to Use Edge Juice with Attitude CTS3 Tuner

Question

Question:

I just purchased the 31507-3 (your EP93DR) EdgeEdge Juice w/ Attitude for my 15 ram 3500 cummins but Im wondering if I can the def and egr system with this tuner?

asked by: David A

0

Expert Reply:

If your 2015 Ram 3500 has the DEF and EGR systems (so if it's stock) then you'll be able to use the Edge Juice with Attitude CTS3 Performance Tuner # EP93DR. If you don't have those systems then the tuner won't work, which I confirmed with my contact at Edge.

expert reply by: Jon G

0

Answer 1

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 2

Hey Shawn, is it possible your leaf springs are just worn out and due to that your suspension is sagging and causing the tires to rub? Doing and over under kit and then trying to go with softer springs to offset the additional height would not be…

view full answer...

Answer 3

We have heard of people using spacer blocks to raise the height of their trailer along with the over-under conversion kit you referenced or the Tandem Axle Lift Kit #RR23QX and everything seemed to work okay so I would say you can use it to raise the…

view full answer...

Answer 4

The Lippert tandem axle lift kit part #RR23QX does not work with your MORryde CRE3000 suspension kit #MR87ZR.

view full answer...

Answer 5

With programmers like the Edge you bought the hard line on what mods the programmers will work well with is basically everything before headers. So basically you can do standard modifications like cold air intakes, and cat-back systems but if your…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Does 2015 Ram 3500 Have to Have DEF and EGR to Use Edge Juice with Attitude CTS3 Tuner

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching