Will Superwinch Wireless Remote Kit Work With Superwinch S7500 Trailer Winch

Question

Question:

Just confirming that the Superwinch wireless remote will work with the S7500 trailer winch before purchasing both. Thanks

asked by: Brandon M

0

Expert Reply:

Yes, the Wireless Remote Control Kit # SW43GR is designed to fit all Superwinch 12V winches so it will work with the Superwinch S7500 Trailer Winch # SW1475201 that you're asking about. It comes with all of the wiring and adapters that you'll need to make it work.

expert reply by: Jon G

0

Steven

7/10/2025

I have a remote I bought for it. I’m just wondering. Will it not fit the S7500 Superwinch?

Jon G.

7/10/2025

@Steven The Wireless Remote Control Kit # SW43GR will work for the S7500, yes. Are you having issues with it?

Steve

7/10/2025

@JonG I have another brand of remote I’m hoping to work with the Superwinch? Should work fine huh?

Jon G.

7/10/2025

@Steve Maybe? I've only ever recommended people to get same-brand remotes because they aren't tested between brands. You're more than welcome to try it, but I can't guarantee it will work. I've been told that if it has the same voltage rating (12V vs 120V for example) that it will work - let me know what you find out!

Answer 1

Just the base of the B and W Biker Bar part #BWMC2301 that you referenced is available as a separate item with the part #BWMC2300.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Will Superwinch Wireless Remote Kit Work With Superwinch S7500 Trailer Winch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching