Recommended Tailgate Lock For a 2014 Toyota Tundra Crew Max

Question

Question:

I have a 2014 tundra crew max. What tailgate lock do I need?

asked by: Mark B

0

Expert Reply:

I recommend the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness # PL94FR for your 2014 Toyota Tundra Crew Max. This kit includes the Plug and play harness so that you are not tapping into any wires on your Tundra. It will allow you to lock and unlock your tailgate with your existing key fob or power locks.

expert reply by: Bud M

0

Answer 1

The wiring instructions for the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness #PL94FR (which is the same PL8547-TUN you mentioned) can be found linked to this answer page along with a review video for you to check out. If you…

view full answer...

Answer 2

For your 2015 Toyota Tundra I recommend the Pop & Lock Custom Tailgate Lock #PL94FR because it has a plug-in harness which makes the installation easier.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Scott, thanks for reaching out. Generally speaking, installing a soft start will not void your Ac units warranty. Your AC warranty is protected by the by the federal Magnuson–Moss Warranty Act. This act states, in part, that unless the…

view full answer...

Answer 5

The brake controller port for the 2015 Toyota Tundra is located behind the section of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's…

view full answer...

Answer 6

Hey Paul! You do not need a wiring extender to use the Pop & Lock Custom Tailgate Lock #PL34FR or #PL54FR. Both have enough wire to work with your 2023 Tacoma Sport long bed.

view full answer...

Answer 7

The Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772 will work with your Leer Tonneau Cover on your 2012 GMC Sierra. This is actually the exact same part number as the product in your photo so it is a perfect…

view full answer...

Answer 8

Yep you have the right harness, just the Pop and Lock harness #PL34FR has been updated allowing it to work with multiple years of the Toyota Tacoma which has added a few more connectors. You'll use the purple and grey wires if installing on the…

view full answer...

Answer 9

Yes, the Pop & Lock Power Lock Conversion Kit #PAL9772 that you referenced will fit your Jason hard tonneau cover!

view full answer...

Answer 10

I checked with Leer and you'll need the Replacement Prop Rod Assembly for Leer Tonneau Covers item #LE84MR. These work with the Leer HF650M Tonneau covers item #LE79FR and item #LE69FR that fit your 2022 Toyota Tacoma.

view full answer...

Answer 11

Hey Mike! The Leer Hard Tonneau Cover item #LE94FR is the Leer HF650M that fits your 2019 Ford F-150 with a 5-1/2' bed. The only replacement parts we have for it are the Replacement Prop Rod Assembly for Leer Tonneau Covers item #LE57MR. I am…

view full answer...

Answer 12

Wire colors aren't specified when installing the #PAL8250 because we have found that the wire colors can sometimes change so the only consistent way to install the unit is to test the wires for the correct function. That being said, according to…

view full answer...

Recommended Tailgate Lock For a 2014 Toyota Tundra Crew Max

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching