Replacement Prop Rod Assembly for Leer HF650M Tonneau Covers on a 2022 Toyota Tacoma

Question

Question:

I have a Leer HF650M on my 2022 Tacoma. I need replacement Prop Rods. my current rods are 14.5inch long end to end. What part do I need?

asked by: Jim M

0

Expert Reply:

I checked with Leer and you'll need the Replacement Prop Rod Assembly for Leer Tonneau Covers item # LE84MR. These work with the Leer HF650M Tonneau covers item # LE79FR and item # LE69FR that fit your 2022 Toyota Tacoma.

expert reply by: Jerred H

0

Jim M.

8/1/2024

Thank you Jerred

Jerred H.

8/2/2024

@JimM You're welcome! Happy to help!

Answer 1

Your 2023 Toyota Tacoma short bed has the Leer Hard Tonneau Cover item #LE69FR. You'll need the Replacement Prop Rod Assembly for Leer Tonneau Covers item #LE84MR.

view full answer...

Answer 2

It looks like for the HF650M you'll be needing the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE54MR.

view full answer...

Answer 3

Per Leer, you'll need the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE84MR for the Leer Hard Tonneau Cover #LE69FR.

view full answer...

Answer 4

The #LE77FR is for the 5' bed so you must have the #LE87FR since you have a 6' bed on your 2020 Chevy Colorado. The parts are listed for the cover they fit instead of by length to ensure you get the correct part since they are cover specific.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Prop Rod Assembly for Leer HF650M Tonneau Covers on a 2022 Toyota Tacoma

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching