Can Drop Down/Swing Down Stabilizer Jacks Be Used On a Dump Trailer

Question

Question:

do you have anything heavier for my 16foot dump trailer. what are these raited for ? thanks

asked by: David D

0

Expert Reply:

I do have an option for you but drop down/swing down stabilizer jacks like part # AR94FR aren't really designed for dump trailers, in order to properly support the weight of a dump trailer you will need to use drop leg jacks on the corners like the Fulton Drop-Leg Stabilizer Jack with Mounting Channel part # FSJ1-SJ2 which is what I recommend.

expert reply by: Conner L

0

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Hey Don. According to Furrion their Chill Cubes like item #FR99TD are designed to work exclusively with Furrion-specific control components. The control board is not designed to be compatible with other manufacturer's climate control systems.…

view full answer...

Answer 3

Hey Charlie, there is actually a Furrion thermostat that was designed to work with the Chill Cube that is for ducted applications like the part #FR39TD with the part #LC74DX. Once this is available you will be able to use it with the #FR39TD and it…

view full answer...

Answer 4

Hey Steven, I recommend going with the Lock N Roll Articulating Trailer Hitch for 2" Receivers #336VS501 because it is a fully-articulating connection that uses pins instead of a round hitch ball connection so you can be completely confident…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 7

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 8

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 9

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 10

Hey Kyle! That is correct. The Coleman-Mach Mach-C Everest has variable-speed cooling and an inverter-driven compressor. However, the Mach-C Everest uses a traditional wall thermostat instead of a remote control. It also works with both ducted and…

view full answer...

Answer 11

Hey Paul! Great question. The Furrion Chill Cube #FR39TD comes with the AC unit and the air distribution box for a ducted setup. The #FR49TD has the AC, ADB, and also adds in a wall thermostat. If you just need the AC then the #FR39TD is the right…

view full answer...

Answer 12

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Can Drop Down/Swing Down Stabilizer Jacks Be Used On a Dump Trailer

Products Featured in This Question

Continue Researching