Inside and Outside Diameter of Slip On Rotors Included With Kodiak K2R35D Trailer Disc Brake Kit
Updated 12/29/2021 | Published 12/28/2021 >
Question:
Can you measure the ID of the slip on rotor so I can make sure they will fit over my no-name 3,500# hub?
asked by: Charlie S
0
Expert Reply:
The slip-on rotor included with the Kodiak # K2R35D disc brake kit have an inside diameter of 6.681 inches and an outside diameter of 10.875 inches, as shown in the provided photo. The rotors are compatible with hubs that have a 5 on 4-1/2 inch bolt pattern and are intended for use on a 3500 lb axle.
I've linked to a demonstration and install video that you might find helpful.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: brake actuator
- Video: DeeMaxx Disc Brake Kit Spec Review
- Q&A: Is There an Exact Replacement For a Tie Down 46250 Brake Caliper or What Option is There
- Q&A: How to Determine Correct Brakes for Trailer
- Q&A: What Info is Needed to Add Brakes to a Trailer or Replace Axle
- Q&A: Kodiak Disc Brakes For 3,500 lb Axles on Travel Trailer
- Q&A: Replacement Hub Assembly For a 2014 EZ Loader Boat Trailer
- Q&A: Actual Diameter of Kodiak Disc Brake Kit for 3,500 Lb Axles
- Q&A: Will Kodiak Disc Brake Kit Fit a #84 Standard Spindle
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer tires and wheels
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Search Results: trailer leaf springs




