Recommended Front Mount Hitch For A 2021 Ram 3500 Diesel

Question

Question:

Does the Draw tight front mount reciver 65084 fit all the way under the bumper of 2021 Ram 3500 diesel. Photos would be nice. Thanks

asked by: Doug L

0

Expert Reply:

The Draw-Tite # DT36MR (manufacturer part number 65084) front mount hitch is actually only designed for use on the gas models, so it is not the correct fit for your 2021 Ram 3500 Diesel. The EcoHitch Front Mount Hitch # EH37FR, on the other hand, is designed to fit both the gas and diesel models and will be the hitch I recommend. It is also American made and will have a 10,000 pound line pull capacity and a 1000 pound vertical load limit.

Though we do not have an install video for this as of yet, I did include a couple pictures that will show you exactly how it will sit once installed. It won't be completely hidden under or inside the bumper area, but it is not completely exposed and sticking way out from the bumper either. It also comes with a license plate relocation bracket/mount that definitely helps hide the end of the hitch as well.

expert reply by: Lazer S

0

EcoHitch Front Mount Hitch EH37FR On A Ram 3500 Diesel - A
(click to enlarge)

EcoHitch Front Mount Hitch EH37FR On A Ram 3500 Diesel - B
(click to enlarge)

Answer 1

We actually have two options available for front mount hitches on your 2020 Ram 2500 Diesel. First is the Curt #C31089. This is assembled in America, has 9,000 pounds of line pull capacity and 500 pounds of vertical load capacity. Next is the…

view full answer...

Answer 2

Hey Neal, we have confirmed with Curt in the past that the front hitch part #C73ZV is confirmed to fit your 2022 Ram 2500 Power Wagon. What are you planning on putting in the front hitch?

view full answer...

Answer 3

The Timbren Suspension Enhancement System #TFRTT350J would be my recommendation. These are designed to improve handling and safety by becoming more rigid with weight added. This will help increase stability, reduce the sag you mentioned, and each…

view full answer...

Answer 4

In order to trim the bumper fascia on a 2021 Ram 2500 when installing the Draw-Tite Front Mount Trailer Hitch Receiver part #DT36MR you will need to measure using the diagram in the instructions which I have attached a photo of below. That said,…

view full answer...

Answer 5

The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR you were looking at for your 2021 Ram 3500 weighs in at 78lbs. I included a picture of the #EH37FR installed on a similar Ram 3500 for you to take a look at.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Recommended Front Mount Hitch For A 2021 Ram 3500 Diesel

Product Page this Question was Asked From

Continue Researching