Required Trimming for Draw-Tite Front Hitch On 2021 Ram 2500

Question

Question:

My question is do you have a template of the cut for the plastic splash under the bumper?

asked by: Bruce M

0

Expert Reply:

In order to trim the bumper fascia on a 2021 Ram 2500 when installing the Draw-Tite Front Mount Trailer Hitch Receiver part # DT36MR you will need to measure using the diagram in the instructions which I have attached a photo of below. That said, there isn't any sort of template that you transfer onto the vehicle and trace. The cutting is pretty straightforward and easily done with the right tool.

expert reply by: Conner L

0

Required Trimming for Draw-Tite Front Hitch On 2021 Ram 2500
(click to enlarge)

Answer 1

The Timbren Suspension Enhancement System #TFRTT350J would be my recommendation. These are designed to improve handling and safety by becoming more rigid with weight added. This will help increase stability, reduce the sag you mentioned, and each…

view full answer...

Answer 2

The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR you were looking at for your 2021 Ram 3500 weighs in at 78lbs. I included a picture of the #EH37FR installed on a similar Ram 3500 for you to take a look at.

view full answer...

Answer 3

The Draw-Tite #DT36MR (manufacturer part number 65084) front mount hitch is actually only designed for use on the gas models, so it is not the correct fit for your 2021 Ram 3500 Diesel. The EcoHitch Front Mount Hitch #EH37FR, on the other hand, is…

view full answer...

Answer 4

A great style of bike rack for front hitches is the platform style. This will increase visibility when driving. A great bike rack for this is the Thule T2 Classic 2 Bike Platform Rack #TH9045, its is a great fit with your trailer hitch #65003. Most…

view full answer...

Answer 5

A Kuat NV 2.0 like the part #BA22B can be used in the front hitch of an RV so it will work for you. At the rear of an RV there's a long distance between the rear axle of the vehicle and the rear of it where the hitch is. This causes the ride…

view full answer...

Answer 6

For your 2021 Ram 2500, the hitch that offers the greatest amount of ground clearance would be the EcoHitch #EH37FR which is compatible with both Diesel and gas engine Ram 2500 models. Since the hitch receiver will be partially blocked by the license…

view full answer...

Answer 7

From both a cost and a ground clearance/approach angle standpoint I'd recommend going with the Draw-Tite #DT36MR front mounted receiver. The Curt #C31089 front hitch you'd looked at is a great item, but it would install so the bottom of the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Required Trimming for Draw-Tite Front Hitch On 2021 Ram 2500

Continue Researching