Suspension Enhancement that Can Fit 2018 GMC Sierra 1500 with Lowering Shackles

Question

Question:

Do you have a different product that would work?

asked by: Jonathan S

0

Expert Reply:

Since your lowering shackles change the distance between the rear axle and the truck frame you would not be able to use the # SS45MR for suspension enhancement as it would be too tall.

expert reply by: Jameson C

0

Jonathan S.

12/7/2021

Do you have a different product that would work?

Jameson C.

12/7/2021

Yes we do, you could use the RoadActive Suspension kit part # RAS4611 which is a confirmed fit and would easily work with the shackles you have. The great thing about the RAS kits is that they provide additional support that's adjustable, is very easy to install, improves handling, and unlike other options improves ride quality.

Answer 1

Hi Bruce! The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A63FR will indeed fit your 2021 GMC Serra 1500 SLT with the short bed and your toolbox. This can be used with toolboxes that measure 19" to 21" long, so you are good to go!…

view full answer...

Answer 2

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 3

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 4

Hi Edward, thanks for reaching out. This is a good question, and you’re thinking about it the right way. GM requires the battery to be disconnected when flat towing vehicles like your Suburban because the electronic parking brake can self-activate…

view full answer...

Answer 5

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 6

We definitely know about the issue you are referring to. We have just the part for you! Furrion recently came out with a brand new adapter for your 2022 GMC Sierra 1500 Limited to work with your camera system. The part you need is the 7-Way Vehicle…

view full answer...

Answer 7

We do have some replacement parts, it looks like you have the Hanger Bracket - #92925 (piece 22) but may be missing some of the hardware needed to mount it. Hanger Bracket Wing Nut - #92927 (piece 25) Leg Bracket Wing Bolt - #92929 (piece 27) I have…

view full answer...

Answer 8

Hey Shawn. The 1-1/8" Diameter Hellwig Sway Bar item #HE73GR is going to reuse the factory end links on your 2014 Ram 2500 and is designed as a simple replacement for the stock sway bar. I recommend installing the thicker 1-1/4" Diameter…

view full answer...

Answer 9

Hey Bryan, when installing the Blue Ox base plate kit part #BLU35XR on your 2023 GMC Sierra 1500 you do not need to trim the holes on the bumper/fascia where the base plate fits through. The current size works just fine.

view full answer...

Answer 10

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Suspension Enhancement that Can Fit 2018 GMC Sierra 1500 with Lowering Shackles

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching