Westin 57-3885 Replacement Hardware for 2018 Toyota Tacoma TRD-Offroad

Question

Question:

Am looking for the proper part number for the mounting kit for a Westin HDX 57-3885 to mount it to our 2018 Toyota Tacoma TRD Off-Road. The mounts I have do not have all of the hardware. purchased used unit Thank you,

asked by: Michael

0

Expert Reply:

I would be happy to help you. The hardware you need to mount the Westin HDX Grille Guard with Punch Plate item # 57-3885 on your 2018 Toyota Tacoma is the Replacement Hardware Kit for Westin Sportsman Grille Guard item # 40-3885PK. This replacement hardware fits both the item # 57-3885 Westin grille guard and the Westin grille guard Item # 40-3885.

expert reply by: Jerred H

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 3

Yes, the Westlake ST235/75-15 Off-Road Tire with Liger wheel part #LH46FR would be an exact match for what you have on your Forest River No Boundaries 19.5 and would work great. Trailer tires are not balanced like vehicle tires are. It doesn't…

view full answer...

Answer 4

Since the clamps for the Thule TracRac TracONE Ladder Rack #TH27000XTB-XK4B go over the bed rails of your 2021 Toyota Tacoma this means you'll need to go with a different ladder rack if you're also wanting to install a tonneau cover. For your…

view full answer...

Answer 5

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend the #e98905 because the matte…

view full answer...

Answer 6

The brake controller install harness part #3031-P would be the correct part number for your 2019 Toyota Tacoma if you have a Tekonsha controller. On your vehicle it will be located underneath and to left of the steering column, behind kick panel…

view full answer...

Answer 7

I actually had the chance to install and test out the Aries Pro Series Grille Guard with Mesh LED Cover Plate #AAP2068 on a similar 2019 Toyota Tacoma and can confirm it does not interfere or trigger the TSS (Toyota Safety Sense) radar sensor,…

view full answer...

Answer 8

For your 2018 Toyota Tacoma, the Westin MAX Winch Mounting Tray - Black Powder Coated Steel 46-23885 (NO LONGER AVAILBLE) is a confirmed to your vehicle, but unfortunately is not confirmed to fit your grille guard. The only option I can give you to…

view full answer...

Answer 9

For your 2018 Toyota Tacoma, the Westin Sportsman Grille Guard - 1 Piece - Black Powder Coated Steel #40-3885 is a confirmed fit for your vehicle. The front sensors on vehicles at this time do not have a relocation option, so you would either need to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Westin 57-3885 Replacement Hardware for 2018 Toyota Tacoma TRD-Offroad

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching