Will 2 inch Trailer Hitch Fit a 2022 Honda HR-V

Question

Question:

Does anyone make a trailer hitch with a 2 inch receiver for the 2022 Honda HRV Sport or do I have to settle for the type 1 hitch with the 1 1/4 receiver?

asked by: Jim

0

Expert Reply:

At this time (November 2021) it looks like there are only the Class I hitches that fit your 2022 Honda HR-V like the Curt # C11416. Usually EcoHitch will come out with a 2" hitch for vehicles that tend to have only Class I fits, but that isn't a guarantee and even if they do come out with a fit I have no way of knowing when that fit will be out. If you're needing to use a hitch now then you'll want to go with that Curt hitch receiver.

Attached is an installation video of this hitch on a 2019 HR-V for you to check out.

If you're in the market for a bike rack then I recommend checking out the Thule Helium Pro # TH9042PRO which is a premium hanging-style bike rack from Thule. This has an aluminum construction so you don't have to worry about it rusting over time, it comes with bike and rack locks, plus it has a tool-free design so you don't have to keep tools handy just to install the rack. Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

The only trailer hitch we offer for the 2023 Honda HR-V is the Curt Class 1 Hitch #C68DR, which has a 1-1/4" receiver.. The 2023 HRV only has a towing capacity of 1,500 lbs so there is no class III 2" hitch made for this vehicle.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Will 2 inch Trailer Hitch Fit a 2022 Honda HR-V

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching