Replacement Grease Cap for Master Tow Dolly

Question

Question:

I have a master tow dollie and I am looking for the hub grease fitting cover. Also the strap winch.

asked by: Dennis S

0

Expert Reply:

According to my research it looks like the replacement EZ Lube grease cap size you're needing is for a 1.98" hub bore which means you can use part # DC200L-DCRP for 1 grease cap or part # RG04-040 if you need to order 2 caps.

Then for a wheel strap it looks like something like the Kinedyne Wheel Net - 14" to 15" Diameter Tires # 910 could work but part of this depends on the size of the tire on the vehicle you plan on towing, plus you'll want to make sure that this 2" strap fits with your winch properly. In all honesty I would get a replacement wheel strap directly from Master Tow when it comes to this just to make sure you know it will work the correct way.

expert reply by: Jon G

0

Answer 1

Yes, you can definitely add brakes to your car dolly. I recommend installing electric brakes as they more cost effective and provide the most stopping power for your application. To add electric brakes to your tow dolly you'll need to know the…

view full answer...

Answer 2

Hey Jerry, in general yes trailer axle brakes are universal between brands of axles and brake components but there are a few oddball capacities like the 4k through 4.4k capacities but even then it's pretty easy to figure out what's needed.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Replacement Grease Cap for Master Tow Dolly

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching