Customer Interaction with the Erickson Adjustable Wheel Net Video

Hi Blake; the additional 3-3/4" will actually increase clearance since the trailer will sit a little further back. If it was shorter and brought it closer to the cab clearance would become a concern. The #GY43GR is the 5.5k tongue weight model…

Since you are planning on installing these Trailer D-Rings #RR06 in a plywood floor I would recommend you also get the Backing Plate #BP06 to offer better support than just the wood of your trailer floor. As far as the placement of them in your…

Hey Dwayne that is a great question. Generally, we would want the tie down points to be in line with the front and rear of the tire. So the #EM58522 straps would hang straight down and connect to the #RR05 D-ring. You can also angle them forward if…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

To replace just your rooftop condenser unit I recommend the Furrion Chill Replacement RV Air Conditioner #FR42PV. This unit is designed to work with ducted systems, like you currently have, and comes with wiring harness adapter that will make the…

Yes, the Erickson E-Track Wheel Tie-Down Strap part #EM58523 is exactly what you are looking for as it does not come into contact with the face of the tire like the Erickson Adjustable Wheel Net with E-Track Fittings part #77314 does. These will both…

The light in enclosed trailers like your dome light are typically powered by the 12v power pin on the 7-way connector. In your 2021 Chevrolet Silverado 2500 that would be fuse number 63 in the engine bay fuse box so check to make sure that fuse is in…

Yes, E-tracks are used quite a bit for car hauler applications like what you have so as long as you secure them well like the Erickson E-Track part #EM59150 you'd be fine. We have wheel straps too for E-Track like the part #77314 which would work…

I attached a picture that shows what type of lighting requirements are needed for a trailer over 80 inches in width as well as a link down below that covers this as well.

Sounds like you are looking for something like the Erickson Adjustable Wheel Net part #77314 which attaches to a section of E-track and holds a vehicle wheel securely. This is pretty similar to the Pack Em #PK-WTD that you referenced as well.

We actually have wheel nets that are designed for E-tracks as the part #77314. These come with the exact clips needed to easily connect to E-track. If you are looking for an easy way to secure the wheels of a vehicle to a trailer that has E-track…