Could Furrion RV Stereo part # DV1230BL Replace Jensen Media Pro 5000

Question

Question:

can I use this to replace a jensen media pro 5000 in a 2007 everest from keystone?

asked by: Mark

1

Helpful Expert Reply:

Yes you could use the Furrion RV Stereo - Double DIN # DV1230BL that you referenced to replace a Jensen Media Pro 5000 in your 2007 Keystone Everest.

expert reply by: Jameson C

1

Mark

11/17/2021

does this system do dolby digital plus and surround sound?

Les D.

11/24/2021

@Mark I do not see that we have any stereo TV units with surround sound or Dolby Digital Plus. I don't think the dimensions or typical RV's would work well with either of those.

Answer 1

Yes, the DV3300SBL will make a good replacement; cutout dimensions are very close with similar, but not exact wiring connections. The Furrion RV Stereo, #DV3300SBL is a single DIN with HDMI, AUX/USB, Bluetooth, NFC and App Control. Mounting…

view full answer...

Answer 2

The new GM trucks are a little more challenging to use the Furrion Vision S camera systems like the part #FOS43TASF that you referenced but we have easy solutions that fix the problem. For a plug in adapter that installs inline with your 7-way…

view full answer...

Answer 3

If you want to upgrade from your Jensen stereo #JWM70A we have a great option for you. Furrion makes a really nice Rv stereo #DV1230BL. This has an HDMI port to connect your laptop, as well as USB and AUX ports. It is also Bluetooth compatible so you…

view full answer...

Answer 4

We do have other replacement options but manufacturers make their wiring harnesses different so you would have to resplice together your wiring to a new harness unless you used the same model stereo. To keep the same features you have with the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Could Furrion RV Stereo part # DV1230BL Replace Jensen Media Pro 5000

Continue Researching