What Coupler Lock will Fit My Jayco Jayflight Trailer?

Question

Question:

Hello: I recently bought a hitch lock that indicated it would fit a Jayco Jayflight but the lock did not fit it was close. I have a 2022, Jayco Jayflight, 31. Can you help me find a hitch lock that will fit? Thanks for your help

asked by: Thomas R

0

Expert Reply:

For a lock that fits all three standard ball sizes, I recommend the Master Lock 1-7/8", 2", and 2-5/16" Trailer Coupler Lock # ML377KA.

expert reply by: Bob C

0

Answer 1

Hi David, The etrailer Surge Brake Coupler Lock #e98888 can fit coupler latches with a 1/4" diameter or larger hole. This would be to just lock the latch in place so that it can't be opened to allow a ball to couple. The TowSmart ProClass…

view full answer...

Answer 2

I'm not able to look up what style of coupler your 2008 Jayco 30 BHS has so to determine if the BlayLock Coupler lock part #BLTL-34 will fit will require you to verify that the coupler has a flat or rolled lip around the coupler that is not wider…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Answer 11

Hey Bill! The Rebel is the heavier duty SumoSprings jounce springs and they have the higher weight rating at 3,000 lbs #SS64VR or 5,000 lbs #SS27GR. I usually only recommend these heavy duty versions if you have a lot of weight in the truck bed or on…

view full answer...

Answer 12

Hi Fred! The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F24XV will indeed fit your 2025 Ram 2500 with the factory puck system. The only vehicles it won't fit are ones that have the factory…

view full answer...

What Coupler Lock will Fit My Jayco Jayflight Trailer?

Product Page this Question was Asked From

Continue Researching