Recommended Trailer Hitch, Wiring, Brake Controller & Air Springs For 2019 Toyota Sienna Limited

Question

Question:

Hi, My vehicle is a 2019 Toyota Sienna Limited Premium 2WD. I plan on occasionally pulling a small enclosed utility trailer, maybe a small camper in the future under 3500 GVWR, around 350 TW, with electric brakes. Can you provide feedback good choice, bad choice, other better options on the below products to cover my needs: Draw-Tite Max-Frame #76112 Wiring? Air Lift Helper #AL60732 If I was to add a brake controller in the future, can you make a recommendation on which on fits my vehicle and works with the Tekonsha wire harness above there are so many options listed. Thank you

asked by: Brian

1

Helpful Expert Reply:

Absolutely happy to do so, and let's start with the suspension support, and the best option for your 2019 Toyota Sienna is definitely the Air Lift 1000 Air Helper Springs for Coil Springs # AL60732. These install inside your Sienna's coil springs to act as support for your OEM springs when you inflate them, absorbing shock and adding stability to your ride for better handling.

As far as the hitch, wiring, and brake controller, you do have the correct fit for the hitch, and I'll also recommend the correct wiring and brake controller for you:

- Draw-Tite Max-Frame Trailer Hitch Receiver # 76112

- T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56261

- Universal Installation Kit for Trailer Brake Controller # ETBC7

- Tekonsha Prodigy P3 Trailer Brake Controller # 90195

The Draw-Tite gives you a really nice 2 inch hitch and I particularly like this model because it has a hidden crosstube for a nice aesthetic, and sits higher than other hitches for the best ground clearance.

For the brake controller, the best option is easily the P3. The reasons for that are it gives you the most consistently smooth braking, has a bright LCD screen that is very easy to read, and has continual diagnostic checks with safeguards to prevent battery drain or shorts. What the P3 does so well is combine a high level of performance with reliability and ease of use.

expert reply by: Kyle S

1

Answer 1

Upgrading the rear suspension in your 2017 Toyota Sienna sounds like a solid plan considering all the weight you are carrying around inside your van. Since you're using a Sienna as a platform you are going to be limited on options for upgrades.…

view full answer...

Answer 2

I checked with Firestone, the Firestone Coil-Rite Air Helper Springs part #F4155 are not listed as a fit for AWD models. That said, I also checked with Air Lift and the Air Lift 1000 Air Helper Springs for Coil Springs part #AL60732 are a fit for all…

view full answer...

Answer 3

Hello Fernando, When I research the Journeys 3.5 lift kit on the 2019 Toyota Sienna I see that it does not change the rear coils. So yes, you will be able to use the Air Lift 1000 Air Helper Springs for Coil Springs - Rear #AL60732. I would like to…

view full answer...

Answer 4

We can get your 2016 Toyota Sienna XLE set up with what you need for the hitch, wiring, and brake controller. It can definitely be a bit overwhelming so it's a good idea just to verify, and you made a really nice choice with the Draw-Tite…

view full answer...

Answer 5

I would be happy to help you set up your 2015 Sienna to tow a 2004 Starcraft Travel Star trailer. You're going to need a hitch, a pair of wiring harnesses, ball mount kit, brake controller, and a mounting bracket. I have listed the parts you will…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Trailer Hitch, Wiring, Brake Controller & Air Springs For 2019 Toyota Sienna Limited

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching