Recommended Replacement Weatherproof Junction Box/7-Way Pigtail
Updated 11/02/2021 | Published 11/01/2021
Question:
I tried to get off cheap and it bit me in the ass! I re-wired my 28’ gooseneck with 7 way harness, junction box and all the wire required for lights. It’s been less than a year and my wires will actually crumble in my hand! The junction box if completely rusted on the inside and all of my marker lights are full of water when they were supposed to be water proof. Anyway, I’ve bought several items from you all in the past and they’ve held up so I’m trying to see if there is a waterproof/weatherproof wire I could use. Also and junction box with 7 way that won’t rust as well as marker lights that are waterproof? I’d like to use same size marker lights so I don’t have to drill new holes. I’m currently using 4” lights that are 1” thick and the screw holes are 3” apart. Thanks for any help you can give.
asked by: Chris J
Helpful Expert Reply:
For the 7-way pigtail/junction box, I'd recommend the # 277-000141 junction box/pigtail which will do a good job of keeping the water out unless it's submerged. Adding a bead of silicone caulk around the seams where the lid meets the box and where the wires pass through would be a good idea as well.
For a marker light that's 4 inches in length, 2 inches tall and 1-1/8 inch thick with mounting holes 3 inches on center, I'd recommend the # 47-59-002 LED Clearance/Marker light from Bargman. This LED clearance lamp draws a fraction of the power that an incandescent lamp does, it will last up to 50 times longer and provides more light output.
(click to enlarge)
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 7 way junction box
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: boat trailer hub
- Search Results: l44649 / l44649 trailer hubs and drums
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Loadstar ST185/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Hopkins 7 Way Molded Plug Wiring and Junction Box for a Boat Trailer Wiring Harness
- Q&A: Picking Out the Correct Replacement Hubs for a White River Marine Boat Trailer
- Shop: Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Shop: Base Plate for Tow Bar
on Wiring
