Replacement T-Frame and Main Frame For Detail K2 Avalanche Snow Plow

Question

Question:

I want a part that is labeled red in the picture below! Do you have any in your company

asked by: Suki

0

Expert Reply:

You are looking for the Replacement T-Frame for Detail K2 Avalanche Snowplows # K2CRM-TFRAME. This will fit into the Main Frame to replace the crossmember on a custom fit plow mount to give you a mount like the Detail K2 Snowplow # K2AVAL8422.

expert reply by: Bud M

0

Detail K2 Main Frame
(click to enlarge)

Detail K2 T-Frame
(click to enlarge)

Customer Image
(click to enlarge)

Answer 1

Shame to hear about your Land Cruiser; those were awesome trucks! But nonetheless we've got a solution for you. You can put a snow plow on the front of your 2018 Ford Expedition and we've got some packages that will work perfectly for you.…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Answer 4

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Answer 5

Hey Keary, yes the Dometic 410 RV Toilet part #DMC44JF will replace a Dometic 310. These two toilets are very similar so they are interchangeable.

view full answer...

Answer 6

You can choose many of the different coolers for your 2017 Ford Expedition. The 8an and 6an fittings are for other models instead I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV part #D13504 and the…

view full answer...

Answer 7

We don't have a video that details how to replace the strap of your K2 Winch like part #K2RASP8219, but I did speak to my contact at K2 and he gave me a brief description of the process. On the winch there is a u-bolt that needs to get removed…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement T-Frame and Main Frame For Detail K2 Avalanche Snow Plow

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching