Titling and Registering the Malone Max Trailer

Question

Question:

Can this trailer be registered and titled?

asked by: Jennifer

0

Expert Reply:

Yes, the Malone MicroSport Trailer - 78" Crossbars - 800 lbs item # MPG460G can be registered and titled. It will come with the documents you will need to go to your local DMV to register the trailer.

expert reply by: Jerred H

0

Answer 1

I recommend replacing the 12" Bias ply tire and wheel combo on your Malone MicroSport trailer with the Kenda Karrier S-Trail ST145/R12 Radial Tire #AM31202. This is a great option because it is only 1" larger in diameter and it comes with a…

view full answer...

Answer 2

The Malone MicroSport Trailer #MPG460G is going to come with a 4.80-12 Trailer Tire with 12" Galvanized Wheel #AM30670. With the Provider ST175/80R13 Radial Trailer Tire w/ 13" Vesper White Mod Wheel #TA43RR being 3-1/2" taller and…

view full answer...

Answer 3

Hey Tim, so Malone is a little odd but they don't have a Lowbed conversion kit for their Megasport trailers but they do offer a version of it with the lowbed lower bars but it comes with a second tier kit and it's part #MPG550-LB. Is a…

view full answer...

Answer 4

We can piece together a Malone Lowbed trailer by first starting with the part #MPG464-LB and then a single bunk kit part #MPG561 and then the spare kit part #MPG465 and you'd be set. There isn't a kit with just the parts you are looking for…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Titling and Registering the Malone Max Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching