Is it Possible to Use a 2 5/16" Hitch Ball to Tow a Trailer That Has a 2 5/8" Coupler

Question

Question:

we are looking to buy a travel trailer with a ball coupler that is labeled with 2 5/8. can you use a 2 5/16 ball with that coupler?

asked by: Jim C

0

Expert Reply:

Yes, you can use a 2 5/16" hitch ball, like the 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs # 63840, on a trailer that has a 2 5/8" Coupler. You will just want to make sure that you get the shank that is the correct size for the hole on your ball mount.

I have attached a link to the 2 5/16" hitch balls on our site.

expert reply by: Thomas M

0

Answer 1

There are three sizes of trailer balls, a 1-7/8 inch, a 2 inch and a 2-5/16 inch. In the past, I have heard some refer to the 2-5/16 ball as a 2-5/8, but there is no such animal as a 2-5/8 inch trailer ball. At one time, a truck/trailer rental…

view full answer...

Answer 2

Since there isn't a latch on top of the ball of the #BWGNXA2061 you can use it with a fifth wheel to gooseneck adapter like the Andersen Ranch Hitch #AM3100 that you referenced. The other similar options that have the release lever on top of the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…

view full answer...

Answer 12

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Is it Possible to Use a 2 5/16" Hitch Ball to Tow a Trailer That Has a 2 5/8" Coupler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching