How to Find Replacement Hub and Drum for Stratos Trailer with Torsion Axle
Published 09/30/2021 >
Products Featured in This Question
Question:
need a brake drum hub kit5 on 4 1/2 with all the bearings and pin for a stratos trail trailer. Vin is STRIDNC3AT170634. 1996. Axle is Reliable sure lube rubber torsion axle serial A-234332. Says 3700 lbs. Bearings were fried out of it! Help!!
asked by: Mark S
Expert Reply:
We're not able to pull information on axles based off the VIN or the serial number, so you will either need to find the numbers stamped on the bearings (assuming they are still legible) or you can measure the spindles using a digital caliper like the 4" Carbon Fiber Digital Caliper # PTW80157 where the bearings ride; this will allow you to determine the bearings that will fit on your spindle and which hubs will fit with that bearing combinations. I've linked a helpful article that might assist you with this as well.
For reference, the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 uses an # L68149 inner and # L44649 outer bearing, so if you find those bearings in your hub this would be a hub and drum that fits your spindle. If you can provide the numbers you find stamped on the back of the bearings, their inner diameter or the measurements on the spindle as shown in the diagram, I can help you locate a hub that will fit.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ez lube spindle trailer spindles
- Search Results: single axle hanger kit
- Q&A: Is The End Of The Center Cap On The Viking Series Valhalla Wheel Removeable?
- Q&A: Where Are The Taskmaster Wheels And Tires Made?
- Video: All About the Aluminum Viking Series Valhalla Trailer Wheel
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 14" x 5-1/2" - 5 on 4-1/2 - Silver Spoke
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Bearings for Stratos Trail Trailer With 84545 Hub
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Spindle Nut Recommendation for 84 Spindle
- Q&A: Correcting Heat Damage to Car Trailer Spindles After Bearings Burned Up
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub



